Vantage PLM

Can anyone tell me if they are using the Vantage PLM module for
controlling documentation particularly in relation to part revisions (
i.e. bills of materials, drawings, test specs. etc. ). We are
considering the implementation of the PLM module and want to know if
its any good!?

Does anyone have experience of this module...?

Thanks,

Nick Taylor
Kingfield Electronics
Any pro/con opinions on Vantage PLM yet?

[Non-text portions of this message have been removed]
Does anyone have first-hand experience with Vantage PLM and SolidWorks?
We are considering a change to our drawing management software.
Vantage PLM looks promising because of the integration with Vantage.
While we may be able to piece something together with our current
system, we have several other reasons to change vendors.

Any input would be appreciated.

Thanks in advance.
Matt
Matt,



I asked the very same question a few weeks back without any response,
but it was right around the holidays so users may have been focused on
more important issues. We are also looking for a PDM solution to use
with Solidworks and Autocad. Please let me know if you hear anything off
line, I will do the same.



Keith





________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of msturm
Sent: Monday, January 23, 2006 3:48 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage PLM



Does anyone have first-hand experience with Vantage PLM and SolidWorks?
We are considering a change to our drawing management software.
Vantage PLM looks promising because of the integration with Vantage.
While we may be able to piece something together with our current
system, we have several other reasons to change vendors.

Any input would be appreciated.

Thanks in advance.
Matt







Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




________________________________

YAHOO! GROUPS LINKS



* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .



________________________________



[Non-text portions of this message have been removed]
After looking at half a dozen of these products, including Vantage PLM, the first two contenders are Conisio and TeamCenter Express. Electroimpact needs Catia V5 support as well as SolidWorks. The Engineering needs were our most important focus, not Vantage integration, which is required but assumed to be okay on all of them.

----- Original Message -----
From: "Keith Mailloux" <keith.mailloux@...>
To: <vantage@yahoogroups.com>
Sent: Monday, January 23, 2006 1:05 PM
Subject: RE: [Vantage] Vantage PLM


Matt,



I asked the very same question a few weeks back without any response,
but it was right around the holidays so users may have been focused on
more important issues. We are also looking for a PDM solution to use
with Solidworks and Autocad. Please let me know if you hear anything off
line, I will do the same.



Keith





________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of msturm
Sent: Monday, January 23, 2006 3:48 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage PLM



Does anyone have first-hand experience with Vantage PLM and SolidWorks?
We are considering a change to our drawing management software.
Vantage PLM looks promising because of the integration with Vantage.
While we may be able to piece something together with our current
system, we have several other reasons to change vendors.

Any input would be appreciated.

Thanks in advance.
Matt







Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




________________________________

YAHOO! GROUPS LINKS



* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .



________________________________



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links







[Non-text portions of this message have been removed]
Matt and Keith,

I am in process of implementing Pro.File wiht Vantage and Solidworks.
We are ironing out a few of the bugs, but our engineers are using
ProFile with Solidworks now.

I am looking in to possibly using it for AutoCad as well. Please feel
free to contact me off line (Keith and I have been trying to get
together).

Jeff
jeff.mauro@...
Is anyone out there using the Vantage PLM module in 8.0? If so how do
you like it and was it worth the integration/software costs?

Vicky Crnovrsanin
Regal Prototypes, Inc.
vcrnovrsanin@...