Windows XP SP3 and V 8.03.405A

Yahoo Archive
1
Yep, that is it. I have now set permissions on c:\client803 to full
control for all domain users. This way, the auto update works
without issue.

Have a good day!

Matt Holmes
Precision Drawn Metals

Epicor Vantage Forum: http://forums.epicor.com/forum_topics.asp?FID=33
Epicor Vista Forum: http://forums.epicor.com/forum_topics.asp?FID=35






--- In vantage@yahoogroups.com, "Hatcher, John" <johnh@...> wrote:
>
> I encountered this just a few hours ago. I don't know if the PC in
> question has SP3 on it but the error message was the same. I logged
> into the PC using the domain admin account and then activated the
> update. It ran without a problem.
>
>
>
> I then reverted to the user account and they were able to use
Vantage.
>
>
>
> John A. Hatcher
>
> Manager of IS
>
> Versa Products Co., Inc.
>
> (201) 518-5948
>
> (201) 843-2400 x4148
>
> (201) 843-2931 (fax)
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
2
Last night I updated our software to 8.03.405A. We were on 8.03.403D.

Everything went well, except 2 Windows XP machines. Both machines give
an error...file`c:\client803\client\config\backup\default.mfgsys' is
currently locked.
Any ideas?

I did ask support. They have not seen this issue. I also learned that
Vista/Vantage are not yet supported on Windows XP SP3 yet. Apparently
in testing there have been some printing errors. Windows Vista and SP1
are both approved.

Matt Holmes
Precision Drawn Metals

Epicor Vantage Forum: http://forums.epicor.com/forum_topics.asp?FID=33
Epicor Vista Forum: http://forums.epicor.com/forum_topics.asp?FID=35
3
I've been installing SP3 here for a couple weeks and not found any
show-stoppers. In fact, I've not found any problems at all.

Ken Long
Lectrosonics, Inc.


On 29 Aug 2008 at 21:05, vistapdmmatt wrote:

> Last night I updated our software to 8.03.405A. We were on 8.03.403D.
>
> Everything went well, except 2 Windows XP machines. Both machines give
> an error...file`c:\client803\client\config\backup\default.mfgsys' is
> currently locked.
> Any ideas?
>
> I did ask support. They have not seen this issue. I also learned that
> Vista/Vantage are not yet supported on Windows XP SP3 yet. Apparently
> in testing there have been some printing errors. Windows Vista and SP1
> are both approved.
>
> Matt Holmes
> Precision Drawn Metals
4
Same here. No issues.



Edward F. Fox, Jr., CPA

Controller

Maxson Automatic Machinery Company

Phone 401-596-0162 a Fax 401-596-1050

www.maxsonautomatic.com

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Ken Long
Sent: Tuesday, September 02, 2008 9:46 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Windows XP SP3 and V 8.03.405A



I've been installing SP3 here for a couple weeks and not found any
show-stoppers. In fact, I've not found any problems at all.

Ken Long
Lectrosonics, Inc.

On 29 Aug 2008 at 21:05, vistapdmmatt wrote:

> Last night I updated our software to 8.03.405A. We were on 8.03.403D.
>
> Everything went well, except 2 Windows XP machines. Both machines give
> an error...file`c:\client803\client\config\backup\default.mfgsys' is
> currently locked.
> Any ideas?
>
> I did ask support. They have not seen this issue. I also learned that
> Vista/Vantage are not yet supported on Windows XP SP3 yet. Apparently
> in testing there have been some printing errors. Windows Vista and SP1
> are both approved.
>
> Matt Holmes
> Precision Drawn Metals





[Non-text portions of this message have been removed]
5
I have selectively installed sp 3 with not issues either.



Dale



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Edward F. Fox, Jr.
Sent: Tuesday, September 02, 2008 9:20 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Windows XP SP3 and V 8.03.405A



Same here. No issues.

Edward F. Fox, Jr., CPA

Controller

Maxson Automatic Machinery Company

Phone 401-596-0162 Fax 401-596-1050

www.maxsonautomatic.com

_____

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Ken Long
Sent: Tuesday, September 02, 2008 9:46 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: Re: [Vantage] Windows XP SP3 and V 8.03.405A

I've been installing SP3 here for a couple weeks and not found any
show-stoppers. In fact, I've not found any problems at all.

Ken Long
Lectrosonics, Inc.

On 29 Aug 2008 at 21:05, vistapdmmatt wrote:

> Last night I updated our software to 8.03.405A. We were on 8.03.403D.
>
> Everything went well, except 2 Windows XP machines. Both machines give

> an error...file`c:\client803\client\config\backup\default.mfgsys' is
> currently locked.
> Any ideas?
>
> I did ask support. They have not seen this issue. I also learned that
> Vista/Vantage are not yet supported on Windows XP SP3 yet. Apparently
> in testing there have been some printing errors. Windows Vista and SP1

> are both approved.
>
> Matt Holmes
> Precision Drawn Metals

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
6
I encountered this just a few hours ago. I don't know if the PC in
question has SP3 on it but the error message was the same. I logged
into the PC using the domain admin account and then activated the
update. It ran without a problem.



I then reverted to the user account and they were able to use Vantage.



John A. Hatcher

Manager of IS

Versa Products Co., Inc.

(201) 518-5948

(201) 843-2400 x4148

(201) 843-2931 (fax)





[Non-text portions of this message have been removed]
7
Does anyone know how to grab the user's id and use it in a BPM?



Thanks!



Dale





[Non-text portions of this message have been removed]
8
ASSIGN table.file = DCD-USERID.



Replace the table and file with the table and file you want to use this 4gl
code in.



Steve



-----Original Message-----
From: Dale R. Kalsow [mailto:dale.r.kalsow@...]
Sent: September 03, 2008 8:11 AM
To: vantage@yahoogroups.com
Subject: [Vantage] User ID



Does anyone know how to grab the user's id and use it in a BPM?

Thanks!

Dale

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]