Ground Control Script for Exports

I'll be interested in too.

Mike Tonoyan / MIS Manager
All American Products Co.
1135 Aviation Place
San Fernando, CA 91340
USA
Tel.: 818-361-0059 Ext.: 246
Fax 818-898-2236
E-mail: miket@...
Web: www.allamericanproducts.com

----- Original Message -----
From: "lance02" <lance02@...>
To: <vantage@yahoogroups.com>
Sent: Tuesday, May 21, 2002 8:30 AM
Subject: [Vantage] Re: Ground Control Script for Exports


> Troy -
>
> I'd be interested in the Progress exports.
>
> Thanks,
> Lance Ekum
> IS Manager
> Sentry Equipment Corp
>
> --- In vantage@y..., "Troy Funte" <tfunte@e...> wrote:
> > I'll email you the GroundControl export script that I used to use
> with the older version of Ground Control. However, I much prefer
> doing the exact same exports (with greater flexibility) using
> Progress. This way I can autoschedule them using my Win98 Task
> Scheduler and do more complex joins, etc.
> >
> > Let me know if you want to see any of the progress exports.
> >
> > Troy Funte
> > Liberty Electronics
> >
> > ----- Original Message -----
> > From: Dave Poskevich
> > To: vantage@y...
> > Sent: Tuesday, May 21, 2002 5:11 AM
> > Subject: [Vantage] Ground Control Script for Exports
> >
> >
> >
> > Does anybody have a Ground Control Script for automated exports
> that they'd
> > be willing to share for Vantage 4 ?
> >
> > Thanks in advance,
> >
> > Dave Poskevich
> > Systems Administrator
> > PRECISION MACHINE & MFG CO
> >
> >
> >
> >
> >
> ______________________________________________________________________
> >
> > This document should only be read by those persons to whom
> it is
> > addressed and is not intended to be relied upon by any person
> without
> > subsequent written confirmation of its contents. Accordingly,
> PRECISION
> > MACHINE AND MANUFACTURING COMPANY disclaims all responsibility
> and accepts
> > no liability, including in negligence, for the consequences for
> any person
> > acting, or refraining from acting, on such information prior to
> the receipt
> > by those persons of subsequent written confirmation.
> >
> > If you have received this E-mail / Fax message in error,
> please notify
> > PRECISION MACHINE AND MANUFACTURING COMPANY immediately by
> telephone.
> > Please also destroy and delete the message.
> >
> > Contact:
> > By Phone: Systems Administrator at (515)-733-5181
> > By Email: sysadmin@p...
> >
> > Any form of reproduction, dissemination, copying, disclosure,
> > modification, distribution and/or publication of this E-mail /
> Fax message
> > is strictly prohibited.
> >
> >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
> must have already linked your email address to a yahoo id to enable
> access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
> Builder and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Does anybody have a Ground Control Script for automated exports that they'd
be willing to share for Vantage 4 ?

Thanks in advance,

Dave Poskevich
Systems Administrator
PRECISION MACHINE & MFG CO




______________________________________________________________________

This document should only be read by those persons to whom it is
addressed and is not intended to be relied upon by any person without
subsequent written confirmation of its contents. Accordingly, PRECISION
MACHINE AND MANUFACTURING COMPANY disclaims all responsibility and accepts
no liability, including in negligence, for the consequences for any person
acting, or refraining from acting, on such information prior to the receipt
by those persons of subsequent written confirmation.

If you have received this E-mail / Fax message in error, please notify
PRECISION MACHINE AND MANUFACTURING COMPANY immediately by telephone.
Please also destroy and delete the message.

Contact:
By Phone: Systems Administrator at (515)-733-5181
By Email: sysadmin@...

Any form of reproduction, dissemination, copying, disclosure,
modification, distribution and/or publication of this E-mail / Fax message
is strictly prohibited.
I'll email you the GroundControl export script that I used to use with the older version of Ground Control. However, I much prefer doing the exact same exports (with greater flexibility) using Progress. This way I can autoschedule them using my Win98 Task Scheduler and do more complex joins, etc.

Let me know if you want to see any of the progress exports.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Dave Poskevich
To: vantage@yahoogroups.com
Sent: Tuesday, May 21, 2002 5:11 AM
Subject: [Vantage] Ground Control Script for Exports



Does anybody have a Ground Control Script for automated exports that they'd
be willing to share for Vantage 4 ?

Thanks in advance,

Dave Poskevich
Systems Administrator
PRECISION MACHINE & MFG CO




______________________________________________________________________

This document should only be read by those persons to whom it is
addressed and is not intended to be relied upon by any person without
subsequent written confirmation of its contents. Accordingly, PRECISION
MACHINE AND MANUFACTURING COMPANY disclaims all responsibility and accepts
no liability, including in negligence, for the consequences for any person
acting, or refraining from acting, on such information prior to the receipt
by those persons of subsequent written confirmation.

If you have received this E-mail / Fax message in error, please notify
PRECISION MACHINE AND MANUFACTURING COMPANY immediately by telephone.
Please also destroy and delete the message.

Contact:
By Phone: Systems Administrator at (515)-733-5181
By Email: sysadmin@...

Any form of reproduction, dissemination, copying, disclosure,
modification, distribution and/or publication of this E-mail / Fax message
is strictly prohibited.



Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]
Troy -

I'd be interested in the Progress exports.

Thanks,
Lance Ekum
IS Manager
Sentry Equipment Corp

--- In vantage@y..., "Troy Funte" <tfunte@e...> wrote:
> I'll email you the GroundControl export script that I used to use
with the older version of Ground Control. However, I much prefer
doing the exact same exports (with greater flexibility) using
Progress. This way I can autoschedule them using my Win98 Task
Scheduler and do more complex joins, etc.
>
> Let me know if you want to see any of the progress exports.
>
> Troy Funte
> Liberty Electronics
>
> ----- Original Message -----
> From: Dave Poskevich
> To: vantage@y...
> Sent: Tuesday, May 21, 2002 5:11 AM
> Subject: [Vantage] Ground Control Script for Exports
>
>
>
> Does anybody have a Ground Control Script for automated exports
that they'd
> be willing to share for Vantage 4 ?
>
> Thanks in advance,
>
> Dave Poskevich
> Systems Administrator
> PRECISION MACHINE & MFG CO
>
>
>
>
>
______________________________________________________________________
>
> This document should only be read by those persons to whom
it is
> addressed and is not intended to be relied upon by any person
without
> subsequent written confirmation of its contents. Accordingly,
PRECISION
> MACHINE AND MANUFACTURING COMPANY disclaims all responsibility
and accepts
> no liability, including in negligence, for the consequences for
any person
> acting, or refraining from acting, on such information prior to
the receipt
> by those persons of subsequent written confirmation.
>
> If you have received this E-mail / Fax message in error,
please notify
> PRECISION MACHINE AND MANUFACTURING COMPANY immediately by
telephone.
> Please also destroy and delete the message.
>
> Contact:
> By Phone: Systems Administrator at (515)-733-5181
> By Email: sysadmin@p...
>
> Any form of reproduction, dissemination, copying, disclosure,
> modification, distribution and/or publication of this E-mail /
Fax message
> is strictly prohibited.
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
> [Non-text portions of this message have been removed]