Purchasing module error

Yahoo Archive
1
I get that same error from my part table and it is due to a
customization. We have used one of the number fields to hold a
particular setting. If the data entered has a .00 at the end I get
this error. I then have to go into the table via Access and remove
the number. Then I reenter it via the form. If the number ends
with .xx(anything other than .00) I do not have a problem. This seems
to be because the .00 is dropped off of the entery as soon as we do
an update.


--- In vantage@yahoogroups.com, Kunal Ganguly <kunal_vantage@...>
wrote:
>
> yeah, there are a ton of VB customizations to this form and a few
BPM's, but if the problem was related to those, would it not affect
all POs and not just that single PO?
>
> Thanks,
> Kunal
>
>
>
>
> ________________________________
> From: Jessi Utecht <jessi.utecht@...>
> To: vantage@yahoogroups.com
> Sent: Monday, January 12, 2009 3:53:20 PM
> Subject: Re: [Vantage] purchasing module error
>
>
> Kunal,
> Have you tried using the Live Chat within Epicor?
>
> Just a question, are there any sort of BPMs or something of this
nature on the PO Form?
>
> ____________ _________ _________ __
> From: Kunal Ganguly <kunal_vantage@ yahoo.com>
> To: vantage@yahoogroups .com
> Sent: Monday, January 12, 2009 3:50:23 PM
> Subject: Re: [Vantage] purchasing module error
>
> We upgraded to 404b a while back. This seems to be a very rare
problem with us. Manasa, I have tried that already (the refresh and
save) - same problem. I requested that the user delete the PO and
start over, it was a small PO, so no biggie but had it been a very
large and complicated one, I would have had to find a resolution. As
soon as epicor tech support lines open up, I will try to get a
resolution from them. (PS: they are having phone problems at the call
centers today, apperantly some centers are up and running as of now)
>
> Thanks,
> Kunal
>
> ____________ _________ _________ __
> From: Manasa Reddy <manasa@weldcoa. com>
> To: vantage@yahoogroups .com
> Sent: Monday, January 12, 2009 2:56:23 PM
> Subject: RE: [Vantage] purchasing module error
>
> I get this all the time....just hit the refresh, save it, then
proceed
> to do whatever you were trying to do....
>
> I have chalked it up to a timing thing....for me it has been random.
>
> M. Manasa Reddy
> manasa@weldcoa. com
> P: 630-806-2000
> F: 630-806-2001
>
> ____________ _________ _________ __
>
> From: vantage@yahoogroups .com [mailto:vantage@ yahoogroups .com]
On Behalf
> Of Kunal Ganguly
> Sent: Monday, January 12, 2009 2:44 PM
> To: Vantage Yahoo Group
> Subject: [Vantage] purchasing module error
>
> When a user tries to un-approve a particular PO (that the same user
> created and approved), an error pops up with the message -
>
> "record has been modified by another user and couldn't be updated.
> Please press the refresh button and re-enter your changes"
>
> Other PO's can be un-approved by this user normally. On a brick
level,
> the row in the table looks like any other row for a approved PO. Any
> ideas what might be causing this?
>
> Thanks,
> Kunal
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> __.._,_.___
> Messages in this topic (4) Reply (via web post) | Start a new topic
> Messages | Files | Photos | Database | Members
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and Crystal Reports and other 'goodies', please goto:
http://groups. yahoo.com/ group/vantage/ files/.
> (2) To search through old msg's goto: http://groups. yahoo.com/
group/vantage/ messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups. yahoo.com/ group/vantage/ links
> MARKETPLACE
>
> ____________ _________ _________ __
> From kitchen basics to easy recipes - join the Group from Kraft
Foods
>
> Change settings via the Web (Yahoo! ID required)
> Change settings via email: Switch delivery to Daily Digest | Switch
format to Traditional
> Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
> Recent Activity
> * 1
> New MembersVisit Your Group
> Ads on Yahoo!
> Learn more now.
> Reach customers
> searching for you.
> Y! Messenger
> Want a quick chat?
> Chat over IM with
> group members.
> Group Charity
> Hands On Network
> Volunteering has
> never been so easy
> ..
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
2
When a user tries to un-approve a particular PO (that the same user created and approved), an error pops up with the message -

"record has been modified by another user and couldn't be updated. Please press the refresh button and re-enter your changes"

Other PO's can be un-approved by this user normally. On a brick level, the row in the table looks like any other row for a approved PO. Any ideas what might be causing this?

Thanks,
Kunal





[Non-text portions of this message have been removed]
3
Did you recently upgrade from 8.00 to 8.03. I seem to remember this
same problem around that time.



Regards,





Andrew Best

Kice Industries, Inc.

P(316)744-7151

F(316)295-2412



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Kunal Ganguly
Sent: Monday, January 12, 2009 2:44 PM
To: Vantage Yahoo Group
Subject: [Vantage] purchasing module error



When a user tries to un-approve a particular PO (that the same user
created and approved), an error pops up with the message -

"record has been modified by another user and couldn't be updated.
Please press the refresh button and re-enter your changes"

Other PO's can be un-approved by this user normally. On a brick level,
the row in the table looks like any other row for a approved PO. Any
ideas what might be causing this?

Thanks,
Kunal

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
4
I get this all the time....just hit the refresh, save it, then proceed
to do whatever you were trying to do....

I have chalked it up to a timing thing....for me it has been random.



M. Manasa Reddy
manasa@...
P: 630-806-2000
F: 630-806-2001


________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Kunal Ganguly
Sent: Monday, January 12, 2009 2:44 PM
To: Vantage Yahoo Group
Subject: [Vantage] purchasing module error



When a user tries to un-approve a particular PO (that the same user
created and approved), an error pops up with the message -

"record has been modified by another user and couldn't be updated.
Please press the refresh button and re-enter your changes"

Other PO's can be un-approved by this user normally. On a brick level,
the row in the table looks like any other row for a approved PO. Any
ideas what might be causing this?

Thanks,
Kunal

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]
5
We upgraded to 404b a while back. This seems to be a very rare problem with us. Manasa, I have tried that already (the refresh and save) - same problem. I requested that the user delete the PO and start over, it was a small PO, so no biggie but had it been a very large and complicated one, I would have had to find a resolution. As soon as epicor tech support lines open up, I will try to get a resolution from them. (PS: they are having phone problems at the call centers today, apperantly some centers are up and running as of now)

Thanks,
Kunal




________________________________
From: Manasa Reddy <manasa@...>
To: vantage@yahoogroups.com
Sent: Monday, January 12, 2009 2:56:23 PM
Subject: RE: [Vantage] purchasing module error


I get this all the time....just hit the refresh, save it, then proceed
to do whatever you were trying to do....

I have chalked it up to a timing thing....for me it has been random.



M. Manasa Reddy
manasa@weldcoa. com
P: 630-806-2000
F: 630-806-2001


____________ _________ _________ __

From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf
Of Kunal Ganguly
Sent: Monday, January 12, 2009 2:44 PM
To: Vantage Yahoo Group
Subject: [Vantage] purchasing module error

When a user tries to un-approve a particular PO (that the same user
created and approved), an error pops up with the message -

"record has been modified by another user and couldn't be updated.
Please press the refresh button and re-enter your changes"

Other PO's can be un-approved by this user normally. On a brick level,
the row in the table looks like any other row for a approved PO. Any
ideas what might be causing this?

Thanks,
Kunal

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]
6
Kunal,
Have you tried using the Live Chat within Epicor?

Just a question, are there any sort of BPMs or something of this nature on the PO Form?




________________________________
From: Kunal Ganguly <kunal_vantage@...>
To: vantage@yahoogroups.com
Sent: Monday, January 12, 2009 3:50:23 PM
Subject: Re: [Vantage] purchasing module error


We upgraded to 404b a while back. This seems to be a very rare problem with us. Manasa, I have tried that already (the refresh and save) - same problem. I requested that the user delete the PO and start over, it was a small PO, so no biggie but had it been a very large and complicated one, I would have had to find a resolution. As soon as epicor tech support lines open up, I will try to get a resolution from them. (PS: they are having phone problems at the call centers today, apperantly some centers are up and running as of now)

Thanks,
Kunal

____________ _________ _________ __
From: Manasa Reddy <manasa@weldcoa. com>
To: vantage@yahoogroups .com
Sent: Monday, January 12, 2009 2:56:23 PM
Subject: RE: [Vantage] purchasing module error

I get this all the time....just hit the refresh, save it, then proceed
to do whatever you were trying to do....

I have chalked it up to a timing thing....for me it has been random.

M. Manasa Reddy
manasa@weldcoa. com
P: 630-806-2000
F: 630-806-2001

____________ _________ _________ __

From: vantage@yahoogroups .com [mailto:vantage@ yahoogroups .com] On Behalf
Of Kunal Ganguly
Sent: Monday, January 12, 2009 2:44 PM
To: Vantage Yahoo Group
Subject: [Vantage] purchasing module error

When a user tries to un-approve a particular PO (that the same user
created and approved), an error pops up with the message -

"record has been modified by another user and couldn't be updated.
Please press the refresh button and re-enter your changes"

Other PO's can be un-approved by this user normally. On a brick level,
the row in the table looks like any other row for a approved PO. Any
ideas what might be causing this?

Thanks,
Kunal

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

__.._,_.___
Messages in this topic (4) Reply (via web post) | Start a new topic
Messages | Files | Photos | Database | Members
Useful links for the Yahoo!Groups Vantage Board are: ( Note:Â You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.%c2%a0
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
MARKETPLACE

________________________________
From kitchen basics to easy recipes - join the Group from Kraft Foods

Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Recent Activity
* Â 1
New MembersVisit Your Group
Ads on Yahoo!
Learn more now.
Reach customers
searching for you.
Y! Messenger
Want a quick chat?
Chat over IM with
group members.
Group Charity
Hands On Network
Volunteering has
never been so easy
.





[Non-text portions of this message have been removed]
7
yeah, there are a ton of VB customizations to this form and a few BPM's, but if the problem was related to those, would it not affect all POs and not just that single PO?

Thanks,
Kunal




________________________________
From: Jessi Utecht <jessi.utecht@...>
To: vantage@yahoogroups.com
Sent: Monday, January 12, 2009 3:53:20 PM
Subject: Re: [Vantage] purchasing module error


Kunal,
Have you tried using the Live Chat within Epicor?

Just a question, are there any sort of BPMs or something of this nature on the PO Form?

____________ _________ _________ __
From: Kunal Ganguly <kunal_vantage@ yahoo.com>
To: vantage@yahoogroups .com
Sent: Monday, January 12, 2009 3:50:23 PM
Subject: Re: [Vantage] purchasing module error

We upgraded to 404b a while back. This seems to be a very rare problem with us. Manasa, I have tried that already (the refresh and save) - same problem. I requested that the user delete the PO and start over, it was a small PO, so no biggie but had it been a very large and complicated one, I would have had to find a resolution. As soon as epicor tech support lines open up, I will try to get a resolution from them. (PS: they are having phone problems at the call centers today, apperantly some centers are up and running as of now)

Thanks,
Kunal

____________ _________ _________ __
From: Manasa Reddy <manasa@weldcoa. com>
To: vantage@yahoogroups .com
Sent: Monday, January 12, 2009 2:56:23 PM
Subject: RE: [Vantage] purchasing module error

I get this all the time....just hit the refresh, save it, then proceed
to do whatever you were trying to do....

I have chalked it up to a timing thing....for me it has been random.

M. Manasa Reddy
manasa@weldcoa. com
P: 630-806-2000
F: 630-806-2001

____________ _________ _________ __

From: vantage@yahoogroups .com [mailto:vantage@ yahoogroups .com] On Behalf
Of Kunal Ganguly
Sent: Monday, January 12, 2009 2:44 PM
To: Vantage Yahoo Group
Subject: [Vantage] purchasing module error

When a user tries to un-approve a particular PO (that the same user
created and approved), an error pops up with the message -

"record has been modified by another user and couldn't be updated.
Please press the refresh button and re-enter your changes"

Other PO's can be un-approved by this user normally. On a brick level,
the row in the table looks like any other row for a approved PO. Any
ideas what might be causing this?

Thanks,
Kunal

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

__.._,_.___
Messages in this topic (4) Reply (via web post) | Start a new topic
Messages | Files | Photos | Database | Members
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups. yahoo.com/ group/vantage/ files/.
(2) To search through old msg's goto: http://groups. yahoo.com/ group/vantage/ messages
(3) To view links to Vendors that provide Vantage services goto: http://groups. yahoo.com/ group/vantage/ links
MARKETPLACE

____________ _________ _________ __
From kitchen basics to easy recipes - join the Group from Kraft Foods

Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Recent Activity
* 1
New MembersVisit Your Group
Ads on Yahoo!
Learn more now.
Reach customers
searching for you.
Y! Messenger
Want a quick chat?
Chat over IM with
group members.
Group Charity
Hands On Network
Volunteering has
never been so easy
..


[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]