Barcode

system · October 23, 2002, 11:55am

OK lets try this, ew are just starting to get ready to use data collection in the shop. I'm trying to make a simple traveler with barcodes: Job: Asm: Seq.No. WkCtr. Description.

For the BarCodes, I created my Calculated Field for the JobNum. "*" + TRIM(JobOper.JobNum) + "*" and that worked fine. It worked for WCCode (workcenter) also. However, every time I tryed to create a calculated field for "*" + TRIM(JobOper.AssemblySeq)+ "*" or "*" + TRIM(JobOper.PprSeq)+ "*" I get an Invalid argument when I try to Verify it.

Whats so different about these two fields?

Thanks for your help.

Jim Horton
jim.horton@...

system · October 23, 2002, 3:02pm

It might be really subtle to see but are you sure there is a space on each
side of the + operators? I see in both your examples there is no space
between ...Seq) and the +. If these were cut/pasted from the actual
functions then this is probably the cause.
-Todd C.

PS - Your message, sent at 10:55am was received here at 1:24pm. Last time I
saw delays like this was the week of 9/11/01 when Yahoo diverted servers to
news coverage. Maybe there has been another DDoS attack on Internet
infrastructure like Monday?

-----Original Message-----
From: Jim Horton [mailto:jim.horton@...]
Sent: Wednesday, October 23, 2002 10:55 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Barcode

OK lets try this, ew are just starting to get ready to use data collection
in the shop. I'm trying to make a simple traveler with barcodes:
Job: Asm: Seq.No. WkCtr. Description.

For the BarCodes, I created my Calculated Field for the JobNum. "*" +
TRIM(JobOper.JobNum) + "*" and that worked fine. It worked for WCCode
(workcenter) also. However, every time I tryed to create a calculated field
for "*" + TRIM(JobOper.AssemblySeq)+ "*" or "*" + TRIM(JobOper.PprSeq)+ "*"
I get an Invalid argument when I try to Verify it.

Whats so different about these two fields?

Thanks for your help.

Jim Horton
jim.horton@...

Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=237459.2482214.3917349.2146399/D=egroupweb/S=17050071
83:HM/A=1267611/R=0/*http://ad.doubleclick.net/jump/N2524.Yahoo/B1071650;sz=
300x250;ord=1035388505401046?>

<http://us.adserver.yahoo.com/l?M=237459.2482214.3917349.2146399/D=egroupmai
l/S=:HM/A=1267611/rand=950433542>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]

system · October 23, 2002, 3:02pm

It might be that the trim function only works with string type fields.

Dan Shallbetter
States Electric Mfg.

-----Original Message-----
From: Jim Horton [mailto:jim.horton@...]
Sent: Wednesday, October 23, 2002 10:55 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Barcode

OK lets try this, ew are just starting to get ready to use data collection
in the shop. I'm trying to make a simple traveler with barcodes:
Job: Asm: Seq.No. WkCtr. Description.

For the BarCodes, I created my Calculated Field for the JobNum. "*" +
TRIM(JobOper.JobNum) + "*" and that worked fine. It worked for WCCode
(workcenter) also. However, every time I tryed to create a calculated field
for "*" + TRIM(JobOper.AssemblySeq)+ "*" or "*" + TRIM(JobOper.PprSeq)+ "*"
I get an Invalid argument when I try to Verify it.

Whats so different about these two fields?

Thanks for your help.

Jim Horton
jim.horton@...

Yahoo! Groups Sponsor

ADVERTISEMENT

<http://us.adserver.yahoo.com/l?M=237459.2482214.3917349.2146399/D=egroupmai
l/S=:HM/A=1267611/rand=950433542>

[Non-text portions of this message have been removed]

system · October 23, 2002, 5:02pm

JobOper.AssemblySeq and JobOper.PprSeq are numeric fields. You have to
convert them to alpha (text) to use in your context.

Jim Stetter
-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Wednesday, October 23, 2002 3:02 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Barcode

It might be really subtle to see but are you sure there is a space on each
side of the + operators? I see in both your examples there is no space
between ...Seq) and the +. If these were cut/pasted from the actual
functions then this is probably the cause.
-Todd C.

PS - Your message, sent at 10:55am was received here at 1:24pm. Last time
I
saw delays like this was the week of 9/11/01 when Yahoo diverted servers
to
news coverage. Maybe there has been another DDoS attack on Internet
infrastructure like Monday?

-----Original Message-----
From: Jim Horton [mailto:jim.horton@...]
Sent: Wednesday, October 23, 2002 10:55 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Barcode

OK lets try this, ew are just starting to get ready to use data collection
in the shop. I'm trying to make a simple traveler with barcodes:
Job: Asm: Seq.No. WkCtr. Description.

For the BarCodes, I created my Calculated Field for the JobNum. "*" +
TRIM(JobOper.JobNum) + "*" and that worked fine. It worked for WCCode
(workcenter) also. However, every time I tryed to create a calculated
field
for "*" + TRIM(JobOper.AssemblySeq)+ "*" or "*" + TRIM(JobOper.PprSeq)+
"*"
I get an Invalid argument when I try to Verify it.

Whats so different about these two fields?

Thanks for your help.

Jim Horton
jim.horton@...

Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=237459.2482214.3917349.2146399/D=egroupweb/S=17050071

83:HM/A=1267611/R=0/*http://ad.doubleclick.net/jump/N2524.Yahoo/B1071650;sz=
300x250;ord=1035388505401046?>

<http://us.adserver.yahoo.com/l?M=237459.2482214.3917349.2146399/D=egroupmai
l/S=:HM/A=1267611/rand=950433542>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor
ADVERTISEMENT

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

system · October 24, 2002, 10:36am

I replied to this message yesterday (Wednesday) around 5:00 EDT and have not
yet received back to myself. I went into Yahoo messages to see if it was
received by Yahoo - it was. I also discovered there are at least 10 messages
from yesterday that I never received. Come on, Yahoo get it together! I am
having no problems with several other mail sources.

Jim Stetter
-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Wednesday, October 23, 2002 3:02 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Barcode

It might be really subtle to see but are you sure there is a space on each
side of the + operators? I see in both your examples there is no space
between ...Seq) and the +. If these were cut/pasted from the actual
functions then this is probably the cause.
-Todd C.

PS - Your message, sent at 10:55am was received here at 1:24pm. Last time
I
saw delays like this was the week of 9/11/01 when Yahoo diverted servers
to
news coverage. Maybe there has been another DDoS attack on Internet
infrastructure like Monday?

-----Original Message-----
From: Jim Horton [mailto:jim.horton@...]
Sent: Wednesday, October 23, 2002 10:55 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Barcode

OK lets try this, ew are just starting to get ready to use data collection
in the shop. I'm trying to make a simple traveler with barcodes:
Job: Asm: Seq.No. WkCtr. Description.

For the BarCodes, I created my Calculated Field for the JobNum. "*" +
TRIM(JobOper.JobNum) + "*" and that worked fine. It worked for WCCode
(workcenter) also. However, every time I tryed to create a calculated
field
for "*" + TRIM(JobOper.AssemblySeq)+ "*" or "*" + TRIM(JobOper.PprSeq)+
"*"
I get an Invalid argument when I try to Verify it.

Whats so different about these two fields?

Thanks for your help.

Jim Horton
jim.horton@...

Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=237459.2482214.3917349.2146399/D=egroupweb/S=17050071

83:HM/A=1267611/R=0/*http://ad.doubleclick.net/jump/N2524.Yahoo/B1071650;sz=
300x250;ord=1035388505401046?>

<http://us.adserver.yahoo.com/l?M=237459.2482214.3917349.2146399/D=egroupmai
l/S=:HM/A=1267611/rand=950433542>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor
ADVERTISEMENT

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

system · October 25, 2002, 3:41pm

How do you do this?

Jim

-----Original Message-----
From: Jim Stetter [mailto:jim.stetter@...]
Sent: Wednesday, October 23, 2002 5:02 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Barcode

JobOper.AssemblySeq and JobOper.PprSeq are numeric fields. You have to
convert them to alpha (text) to use in your context.

Jim Stetter
-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Wednesday, October 23, 2002 3:02 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Barcode

It might be really subtle to see but are you sure there is a space on each
side of the + operators? I see in both your examples there is no space
between ...Seq) and the +. If these were cut/pasted from the actual
functions then this is probably the cause.
-Todd C.

PS - Your message, sent at 10:55am was received here at 1:24pm. Last time
I
saw delays like this was the week of 9/11/01 when Yahoo diverted servers
to
news coverage. Maybe there has been another DDoS attack on Internet
infrastructure like Monday?

-----Original Message-----
From: Jim Horton [mailto:jim.horton@...]
Sent: Wednesday, October 23, 2002 10:55 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Barcode

OK lets try this, ew are just starting to get ready to use data collection
in the shop. I'm trying to make a simple traveler with barcodes:
Job: Asm: Seq.No. WkCtr. Description.

For the BarCodes, I created my Calculated Field for the JobNum. "*" +
TRIM(JobOper.JobNum) + "*" and that worked fine. It worked for WCCode
(workcenter) also. However, every time I tryed to create a calculated
field
for "*" + TRIM(JobOper.AssemblySeq)+ "*" or "*" + TRIM(JobOper.PprSeq)+
"*"
I get an Invalid argument when I try to Verify it.

Whats so different about these two fields?

Thanks for your help.

Jim Horton
jim.horton@...

Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=237459.2482214.3917349.2146399/D=egroupweb/S=17050071

83:HM/A=1267611/R=0/*http://ad.doubleclick.net/jump/N2524.Yahoo/B1071650;sz=
300x250;ord=1035388505401046?>

<http://us.adserver.yahoo.com/l?M=237459.2482214.3917349.2146399/D=egroupmai
l/S=:HM/A=1267611/rand=950433542>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor
ADVERTISEMENT

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · November 8, 2006, 2:47pm

I am trying to implement barcode to login and out of jobs in Vantage.
What barcode format should be used to allow for the $M and other control
characters? Also what printer are you printing the barcode with and are
you using a soft font?

Thanks,

Rich

[Non-text portions of this message have been removed]