Error 534

Yahoo Archive
1
Well as mysteriously as it happened, it is working now. I hate computers, really I do.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Greg Gillette
Sent: Thursday, February 09, 2012 1:14 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Error 534



Is your EpicorData/Mfgsysdata folder still in the same place? Does it
have an excessive number of temp files? Still shared?

Greg

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of James Todd
Sent: Thursday, February 09, 2012 4:04 PM
To: 'vantage@yahoogroups.com<mailto:%27vantage%40yahoogroups.com>'
Subject: RE: [Vantage] Error 534

It appears to be all crystal forms, I've tested 4 reports pulling up
random POs or jobs or invoices.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Mike Lowe
Sent: Thursday, February 09, 2012 1:01 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Error 534

For all forms or a single form for a specific record. I've had
instances where a large comment could create an error.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>]
On Behalf
Of James Todd
Sent: Thursday, February 09, 2012 12:58 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Error 534

So everyone in our company is all of a sudden getting an Error 534 when
printing a custom crystal form/report. We use customs for our POs,
Invoices, Travelers, etc. They're all getting a 534. We have not touched
any of these reports in many months, I checked the date on all them and
nothings been modified. Anyone had this problem before and how to fix
it?

-James

________________________________

Technical information contained in this e-mail may be controlled by the
United States Government, Department of State, International Traffic and
Arms Regulations (ITAR) (22 CFR 120-130) which requires an export
license prior to sharing with foreign persons. Lacking such license,
ITAR technical data is limited to U.S. persons only. It is the
responsibility of the organization and the individual in control of this
data to abide by U.S. Export Laws. If you are not a U.S. person take no
further action with this e-mail and contact sender immediately.

[Non-text portions of this message have been removed]

__________________________________________________________
This email has been scanned by the Connor Manufacturing Services Email
Security System.
For more information please visit http://www.symanteccloud.com
__________________________________________________________

[Non-text portions of this message have been removed]

________________________________

Technical information contained in this e-mail may be controlled by the
United States Government, Department of State, International Traffic and
Arms Regulations (ITAR) (22 CFR 120-130) which requires an export
license prior to sharing with foreign persons. Lacking such license,
ITAR technical data is limited to U.S. persons only. It is the
responsibility of the organization and the individual in control of this
data to abide by U.S. Export Laws. If you are not a U.S. person take no
further action with this e-mail and contact sender immediately.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


________________________________

Technical information contained in this e-mail may be controlled by the United States Government, Department of State, International Traffic and Arms Regulations (ITAR) (22 CFR 120-130) which requires an export license prior to sharing with foreign persons. Lacking such license, ITAR technical data is limited to U.S. persons only. It is the responsibility of the organization and the individual in control of this data to abide by U.S. Export Laws. If you are not a U.S. person take no further action with this e-mail and contact sender immediately.


[Non-text portions of this message have been removed]
2
I am recieving this error on only 1 computer in the company. All
other computers can print the POFORM.

Why would one computer have this problem? And, does anyone have the
solution?

I have tried reinstalling vantage, and progress. I understand that
it is a crystal error, but I don't want to install crystal on this
computer. All other computers do not have crystal installed, yet
they work fine.

I have also verified the database on the report. The report works
fine everywhere else but here.

Any help would be appreciated...

Thanks,Ben
3
Ensure the PC in question has the same temporary directory set up as the
rest... same drive, folder etc.

----- Original Message -----
From: "bbelzer42" <bbelzer@...>
To: <vantage@yahoogroups.com>
Sent: Tuesday, December 21, 2004 10:35 AM
Subject: [Vantage] Error 534


>
>
> I am recieving this error on only 1 computer in the company. All
> other computers can print the POFORM.
>
> Why would one computer have this problem? And, does anyone have the
> solution?
>
> I have tried reinstalling vantage, and progress. I understand that
> it is a crystal error, but I don't want to install crystal on this
> computer. All other computers do not have crystal installed, yet
> they work fine.
>
> I have also verified the database on the report. The report works
> fine everywhere else but here.
>
> Any help would be appreciated...
>
> Thanks,Ben
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
4
I am getting error 534 when trying to print a modified Crystal Report. Does anyone know what this means? I can't find this error on the epicor website.

Thanks!

Juliet Martin
Information Manager
Rosenboom Machine & Tool, Inc.
Sheldon, IA 51201
712-324-4854 x1217
5
Usually it means that crystal is looking in the wrong directory for the
data.
Go to the crystal form, and check to see that your are pulling data from
your
Vantage work directory.... It is Epicor/mfgwrk61 on my systems.
Subject: [Vantage] Error 534

I am getting error 534 when trying to print a modified Crystal Report.
Does anyone know what this means? I can't find this error on the epicor
website.
6
Sorry. I forgot to mention that I am using ODBC.

Mine points to PUB.BOLHead is that bad?

This report works on my pc but not on a terminal services session.

Any clues would help me greatly.

Thanks

Juliet

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of PLAMAN DICK
Sent: Friday, April 29, 2005 2:37 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Error 534


Usually it means that crystal is looking in the wrong directory for the
data.
Go to the crystal form, and check to see that your are pulling data from
your
Vantage work directory.... It is Epicor/mfgwrk61 on my systems.
Subject: [Vantage] Error 534

I am getting error 534 when trying to print a modified Crystal Report.
Does anyone know what this means? I can't find this error on the epicor
website.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
7
Check if you have the left outerjoin fix.



_____

From: Aaron Hoyt [mailto:aaron.hoyt@...]
Sent: Friday, April 29, 2005 4:32 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Error 534



Juliet,
Check the ODBC settings on the TS.
Make sure it has the exact same name as the ODBC connection you use on
your
computer.
Good luck,
Aaron Hoyt
Vantage Plastics

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Juliet Martin
Sent: Friday, April 29, 2005 4:33 PM
To: vantage@yahoogroups.com
Subject: FW: [Vantage] Error 534


I forgot. On the terminals I have loaded all Crystal Patches, copied
all
the dlls and checked, rechecked all settings in the dsn section.

I probably have messed with it so much I have made it worse.

Juliet

-----Original Message-----
From: Juliet Martin
Sent: Friday, April 29, 2005 3:30 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Error 534


Sorry. I forgot to mention that I am using ODBC.

Mine points to PUB.BOLHead is that bad?

This report works on my pc but not on a terminal services session.

Any clues would help me greatly.

Thanks

Juliet

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of PLAMAN DICK
Sent: Friday, April 29, 2005 2:37 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Error 534


Usually it means that crystal is looking in the wrong directory for the
data.
Go to the crystal form, and check to see that your are pulling data from
your
Vantage work directory.... It is Epicor/mfgwrk61 on my systems.
Subject: [Vantage] Error 534

I am getting error 534 when trying to print a modified Crystal Report.
Does anyone know what this means? I can't find this error on the epicor
website.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links









Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links









Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]
8
yeah. everything's the same. Including the driver version. :-(

I don't know what else to do.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Aaron Hoyt
Sent: Friday, April 29, 2005 3:32 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Error 534


Juliet,
Check the ODBC settings on the TS.
Make sure it has the exact same name as the ODBC connection you use on your
computer.
Good luck,
Aaron Hoyt
Vantage Plastics

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Juliet Martin
Sent: Friday, April 29, 2005 4:33 PM
To: vantage@yahoogroups.com
Subject: FW: [Vantage] Error 534


I forgot. On the terminals I have loaded all Crystal Patches, copied all
the dlls and checked, rechecked all settings in the dsn section.

I probably have messed with it so much I have made it worse.

Juliet

-----Original Message-----
From: Juliet Martin
Sent: Friday, April 29, 2005 3:30 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Error 534


Sorry. I forgot to mention that I am using ODBC.

Mine points to PUB.BOLHead is that bad?

This report works on my pc but not on a terminal services session.

Any clues would help me greatly.

Thanks

Juliet

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of PLAMAN DICK
Sent: Friday, April 29, 2005 2:37 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Error 534


Usually it means that crystal is looking in the wrong directory for the
data.
Go to the crystal form, and check to see that your are pulling data from
your
Vantage work directory.... It is Epicor/mfgwrk61 on my systems.
Subject: [Vantage] Error 534

I am getting error 534 when trying to print a modified Crystal Report.
Does anyone know what this means? I can't find this error on the epicor
website.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links









Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links









Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
9
Juliet,

Check the .mfg file you are using in terminal server. At the bottom
there are 4 entries like this;

MFGODBCpasswd=<your password>
MFGODBCUser=<your user>
MFGODBCDbse=mfgsys
MFGODBCServer=Progress91D

Out of the box they all have a colon in front of them like this.

;MFGODBCpasswd=<your password>
;MFGODBCUser=<your user>
;MFGODBCDbse=mfgsys
;MFGODBCServer=Progress91D

It is necessary to remove the colon in order to get Crystal forms
modified with ODBC to work inside of Vantage.

HTH,

Brian Stenglein
Clow Stamping Co.

--- In vantage@yahoogroups.com, "Juliet Martin" <jmartin@r...> wrote:
> yeah. everything's the same. Including the driver version. :-(
>
> I don't know what else to do.
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On
Behalf
> Of Aaron Hoyt
> Sent: Friday, April 29, 2005 3:32 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Error 534
>
>
> Juliet,
> Check the ODBC settings on the TS.
> Make sure it has the exact same name as the ODBC connection you use
on your
> computer.
> Good luck,
> Aaron Hoyt
> Vantage Plastics
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On
Behalf
> Of Juliet Martin
> Sent: Friday, April 29, 2005 4:33 PM
> To: vantage@yahoogroups.com
> Subject: FW: [Vantage] Error 534
>
>
> I forgot. On the terminals I have loaded all Crystal Patches,
copied all
> the dlls and checked, rechecked all settings in the dsn section.
>
> I probably have messed with it so much I have made it worse.
>
> Juliet
>
> -----Original Message-----
> From: Juliet Martin
> Sent: Friday, April 29, 2005 3:30 PM
> To: 'vantage@yahoogroups.com'
> Subject: RE: [Vantage] Error 534
>
>
> Sorry. I forgot to mention that I am using ODBC.
>
> Mine points to PUB.BOLHead is that bad?
>
> This report works on my pc but not on a terminal services session.
>
> Any clues would help me greatly.
>
> Thanks
>
> Juliet
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On
Behalf
> Of PLAMAN DICK
> Sent: Friday, April 29, 2005 2:37 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Error 534
>
>
> Usually it means that crystal is looking in the wrong directory for
the
> data.
> Go to the crystal form, and check to see that your are pulling data
from
> your
> Vantage work directory.... It is Epicor/mfgwrk61 on my systems.
> Subject: [Vantage] Error 534
>
> I am getting error 534 when trying to print a modified Crystal
Report.
> Does anyone know what this means? I can't find this error on the
epicor
> website.
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
10
Every PC in the company gets this error when we try to print the Job
Traveler. We have a custom form but it has been working fine until
yesterday. What does this mean?



Sincerely,



Mitchell Kirby

Riten Industries, Inc.

<http://www.riten.com/> www.riten.com



740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX





[Non-text portions of this message have been removed]
11
Mitchell,
I think your path (location) is incorrect. Open the report and go to
database/set location
and make sure the file location is set to the vantage working directory.
hope this helps.

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Mitchell Kirby
Sent: Friday, December 01, 2006 7:19 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Error 534



Every PC in the company gets this error when we try to print the Job
Traveler. We have a custom form but it has been working fine until
yesterday. What does this mean?

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

<http://www.riten.com/ <http://www.riten.com/> > www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]
12
You may want to check into any changes. I thought the 534 was an outer
join issue.



Todd



________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of PLAMAN DICK
Sent: Friday, December 01, 2006 7:44 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Error 534



Mitchell,
I think your path (location) is incorrect. Open the report and go to
database/set location
and make sure the file location is set to the vantage working directory.
hope this helps.

________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Mitchell Kirby
Sent: Friday, December 01, 2006 7:19 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Error 534

Every PC in the company gets this error when we try to print the Job
Traveler. We have a custom form but it has been working fine until
yesterday. What does this mean?

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

<http://www.riten.com/ <http://www.riten.com/> <http://www.riten.com/
<http://www.riten.com/> > > www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]







TECT Proprietary & Confidential. This message, along with any
attachments, is intended only for the exclusive use of the
individual or entity to which it is addressed and may contain
information that is privileged, confidential and exempt from
disclosure. If you are not the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
message, or any attachment, is strictly prohibited. If you have
received this message in error, please notify the original sender
immediately by return email, or by calling 229-228-2600, and delete
the message, along with any attachments, from your computer.


[Non-text portions of this message have been removed]
13
If it is a modified crystal report, the error is caused by crystals
ability to locate the correct dbf location.

Have the person who modified the report, open it in print preview mode,
don't print it, and then exit out of Vantage. This creates an xml record
in your temp/working directory.

Now open crystal and open the corresponding crystal report file and
select Database \ Set data source location from the menu.

Browse to your Vantage working directory and select the xml file that
was created by the print preview.

After the connection has been updated, select Database \ Verify Database
from the menu.

You should receive a popup message "Database is up to date"

Save your changes and exit.



Note: If your modified report does not have a unique name you run the
risk of losing your modifications when future patches and service packs
are applied.



Cheers,



Gerard M Wadman

Sr. Network Systems Engineer



Scandius BioMedical Inc.

11A Beaver Brook Road

Littleton, MA 01460



978/486-4088 x 124

978/486-4108 (fax)



http://www.scandius.com/





________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of PLAMAN DICK
Sent: Friday, December 01, 2006 7:44 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Error 534



Mitchell,
I think your path (location) is incorrect. Open the report and go to
database/set location
and make sure the file location is set to the vantage working directory.
hope this helps.

________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Mitchell Kirby
Sent: Friday, December 01, 2006 7:19 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Error 534

Every PC in the company gets this error when we try to print the Job
Traveler. We have a custom form but it has been working fine until
yesterday. What does this mean?

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

<http://www.riten.com/ <http://www.riten.com/> <http://www.riten.com/
<http://www.riten.com/> > > www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
14
Thanks for the help. The path was wrong. I reinstalled the custom
programming, grabbed a backup copy of the custom form and verified the
database. That did it. I'm not sure what happened. I noticed that my
mfgsys.ini file had been changed. I had it set for read only but we were
reinstalling Corvu and Express Ship this week and I had to remove the read
only property. I forgot to change it back to read only and something
changed it.



Sincerely,



Mitchell Kirby

Riten Industries, Inc.

<http://www.riten.com/> www.riten.com



740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Mitchell Kirby
Sent: Friday, December 01, 2006 7:19 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Error 534



Every PC in the company gets this error when we try to print the Job
Traveler. We have a custom form but it has been working fine until
yesterday. What does this mean?

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

<http://www.riten <http://www.riten.com/> com/> www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
15
I need to correct the error number. It is error 534 and not 435.



I've installed a new Citrix server and now I'm having a few crystal
errors. Can someone tell me what .dlls I need to upgrade to get rid of
the 534 error?



When I try and print my invoice written with crystal 8.5, I get the 534
error.





Nick Robinson

I.T. Director



6707 Northwinds Dr.

Houston Tx. 77041

713.896.5111

NRobinson@...





[Non-text portions of this message have been removed]
16
So everyone in our company is all of a sudden getting an Error 534 when printing a custom crystal form/report. We use customs for our POs, Invoices, Travelers, etc. They're all getting a 534. We have not touched any of these reports in many months, I checked the date on all them and nothings been modified. Anyone had this problem before and how to fix it?

-James

________________________________

Technical information contained in this e-mail may be controlled by the United States Government, Department of State, International Traffic and Arms Regulations (ITAR) (22 CFR 120-130) which requires an export license prior to sharing with foreign persons. Lacking such license, ITAR technical data is limited to U.S. persons only. It is the responsibility of the organization and the individual in control of this data to abide by U.S. Export Laws. If you are not a U.S. person take no further action with this e-mail and contact sender immediately.


[Non-text portions of this message have been removed]
17
For all forms or a single form for a specific record. I've had
instances where a large comment could create an error.



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of James Todd
Sent: Thursday, February 09, 2012 12:58 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Error 534





So everyone in our company is all of a sudden getting an Error 534 when
printing a custom crystal form/report. We use customs for our POs,
Invoices, Travelers, etc. They're all getting a 534. We have not touched
any of these reports in many months, I checked the date on all them and
nothings been modified. Anyone had this problem before and how to fix
it?

-James

________________________________

Technical information contained in this e-mail may be controlled by the
United States Government, Department of State, International Traffic and
Arms Regulations (ITAR) (22 CFR 120-130) which requires an export
license prior to sharing with foreign persons. Lacking such license,
ITAR technical data is limited to U.S. persons only. It is the
responsibility of the organization and the individual in control of this
data to abide by U.S. Export Laws. If you are not a U.S. person take no
further action with this e-mail and contact sender immediately.

[Non-text portions of this message have been removed]




______________________________________________________________________
This email has been scanned by the Connor Manufacturing Services Email
Security System.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________



[Non-text portions of this message have been removed]
18
It appears to be all crystal forms, I've tested 4 reports pulling up random POs or jobs or invoices.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Mike Lowe
Sent: Thursday, February 09, 2012 1:01 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Error 534



For all forms or a single form for a specific record. I've had
instances where a large comment could create an error.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of James Todd
Sent: Thursday, February 09, 2012 12:58 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Error 534

So everyone in our company is all of a sudden getting an Error 534 when
printing a custom crystal form/report. We use customs for our POs,
Invoices, Travelers, etc. They're all getting a 534. We have not touched
any of these reports in many months, I checked the date on all them and
nothings been modified. Anyone had this problem before and how to fix
it?

-James

________________________________

Technical information contained in this e-mail may be controlled by the
United States Government, Department of State, International Traffic and
Arms Regulations (ITAR) (22 CFR 120-130) which requires an export
license prior to sharing with foreign persons. Lacking such license,
ITAR technical data is limited to U.S. persons only. It is the
responsibility of the organization and the individual in control of this
data to abide by U.S. Export Laws. If you are not a U.S. person take no
further action with this e-mail and contact sender immediately.

[Non-text portions of this message have been removed]

__________________________________________________________
This email has been scanned by the Connor Manufacturing Services Email
Security System.
For more information please visit http://www.symanteccloud.com
__________________________________________________________

[Non-text portions of this message have been removed]


________________________________

Technical information contained in this e-mail may be controlled by the United States Government, Department of State, International Traffic and Arms Regulations (ITAR) (22 CFR 120-130) which requires an export license prior to sharing with foreign persons. Lacking such license, ITAR technical data is limited to U.S. persons only. It is the responsibility of the organization and the individual in control of this data to abide by U.S. Export Laws. If you are not a U.S. person take no further action with this e-mail and contact sender immediately.


[Non-text portions of this message have been removed]
19
Is your EpicorData/Mfgsysdata folder still in the same place? Does it
have an excessive number of temp files? Still shared?



Greg



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of James Todd
Sent: Thursday, February 09, 2012 4:04 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Error 534





It appears to be all crystal forms, I've tested 4 reports pulling up
random POs or jobs or invoices.

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Mike Lowe
Sent: Thursday, February 09, 2012 1:01 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Error 534

For all forms or a single form for a specific record. I've had
instances where a large comment could create an error.

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>]
On Behalf
Of James Todd
Sent: Thursday, February 09, 2012 12:58 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Error 534

So everyone in our company is all of a sudden getting an Error 534 when
printing a custom crystal form/report. We use customs for our POs,
Invoices, Travelers, etc. They're all getting a 534. We have not touched
any of these reports in many months, I checked the date on all them and
nothings been modified. Anyone had this problem before and how to fix
it?

-James

________________________________

Technical information contained in this e-mail may be controlled by the
United States Government, Department of State, International Traffic and
Arms Regulations (ITAR) (22 CFR 120-130) which requires an export
license prior to sharing with foreign persons. Lacking such license,
ITAR technical data is limited to U.S. persons only. It is the
responsibility of the organization and the individual in control of this
data to abide by U.S. Export Laws. If you are not a U.S. person take no
further action with this e-mail and contact sender immediately.

[Non-text portions of this message have been removed]

__________________________________________________________
This email has been scanned by the Connor Manufacturing Services Email
Security System.
For more information please visit http://www.symanteccloud.com
__________________________________________________________

[Non-text portions of this message have been removed]

________________________________

Technical information contained in this e-mail may be controlled by the
United States Government, Department of State, International Traffic and
Arms Regulations (ITAR) (22 CFR 120-130) which requires an export
license prior to sharing with foreign persons. Lacking such license,
ITAR technical data is limited to U.S. persons only. It is the
responsibility of the organization and the individual in control of this
data to abide by U.S. Export Laws. If you are not a U.S. person take no
further action with this e-mail and contact sender immediately.

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]