Reporting only material

Yahoo Archive
1
Thank you, Mike and Ed. My brain is fried by now. I will give it a shot on
Monday.

Mario Aguirre
Information Systems Manager
Lakin General
2865 N. Paulina
Chicago, IL 60657
Ph: 773-871-9631
Fx: 773-871-1265

-----Original Message-----
From: Michael D. Howard [mailto:mike@...]
Sent: Friday, September 12, 2003 1:08 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Reporting only material

I would use PartMtl to get the BOM and JobAsmbl to
get the lower level item costs ..

-----Original Message-----
From: Mario Aguirre [mailto:maguirre@...]
Sent: Friday, September 12, 2003 12:17 PM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Reporting only material


We have parts that have many subassemblies issued to the part as material.
The entire cost of the subassembly (Labor, Burden, Mtl, etc.) is added to
the material of the following assembly. How would I separate or isolate only
the material costs of a job (not counting the labor and other cost factors
from subassemblies entered as material costs in the next assembly)? Ideas?

Also, which is the table that you need to link several times (in our case 7
to 8 times) to itself to get all the levels of the BOM?

Thank you!

Mario Aguirre
Lakin General




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>








Yahoo! Groups Sponsor


ADVERTISEMENT

<http://rd.yahoo.com/M=244522.3707890.4968055.1261774/D=egroupweb/S=17050071
83:HM/A=1595056/R=0/SIG=124p07ne0/*http:/ashnin.com/clk/muryutaitakenattogyo
?YH=3707890&yhad=1595056> Click Here!


<http://us.adserver.yahoo.com/l?M=244522.3707890.4968055.1261774/D=egroupmai
l/S=:HM/A=1595056/rand=103703262>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.


[Non-text portions of this message have been removed]
2
We have parts that have many subassemblies issued to the part as material.
The entire cost of the subassembly (Labor, Burden, Mtl, etc.) is added to
the material of the following assembly. How would I separate or isolate only
the material costs of a job (not counting the labor and other cost factors
from subassemblies entered as material costs in the next assembly)? Ideas?

Also, which is the table that you need to link several times (in our case 7
to 8 times) to itself to get all the levels of the BOM?

Thank you!

Mario Aguirre
Lakin General




[Non-text portions of this message have been removed]
3
If you select material breakdown on the Production Detail report you will
get the breakdown.

You can also find it in job tracker.

Edward F. Fox, Jr., CPA
Controller
Maxson Automatic Machinery Company
Phone: 401-596-0162 x110
Fax: 401-596-1050
www.maxsonautomatic.com


-----Original Message-----
From: Mario Aguirre [mailto:maguirre@...]
Sent: Friday, September 12, 2003 1:17 PM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Reporting only material


We have parts that have many subassemblies issued to the part as material.
The entire cost of the subassembly (Labor, Burden, Mtl, etc.) is added to
the material of the following assembly. How would I separate or isolate only
the material costs of a job (not counting the labor and other cost factors
from subassemblies entered as material costs in the next assembly)? Ideas?

Also, which is the table that you need to link several times (in our case 7
to 8 times) to itself to get all the levels of the BOM?

Thank you!

Mario Aguirre
Lakin General




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
4
I would use PartMtl to get the BOM and JobAsmbl to
get the lower level item costs ..

-----Original Message-----
From: Mario Aguirre [mailto:maguirre@...]
Sent: Friday, September 12, 2003 12:17 PM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Reporting only material


We have parts that have many subassemblies issued to the part as material.
The entire cost of the subassembly (Labor, Burden, Mtl, etc.) is added to
the material of the following assembly. How would I separate or isolate only
the material costs of a job (not counting the labor and other cost factors
from subassemblies entered as material costs in the next assembly)? Ideas?

Also, which is the table that you need to link several times (in our case 7
to 8 times) to itself to get all the levels of the BOM?

Thank you!

Mario Aguirre
Lakin General




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/