Spam:RE: Spam:RE: Spam:RE: How to issue finished

Yes, it would be nice... and it would be nice if it showed where it was transfered to...but it doesn't do that unless you print out the report.


-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Kathy Hambleton
Sent: Friday, November 04, 2005 8:58 AM
To: vantage@yahoogroups.com
Subject: RE: Spam:RE: Spam:RE: Spam:RE: [Vantage] Re: How to issue
finished manufactured part back to job


Stephanie,

You are right, it is there. I'm not sure I would have ever found it
without someone pointing it out. However, it still requires more
digging at job closing to see that all the pieces were accounted for.
Wouldn't be nice if it showed up in the recv'd to stock field in the job
close screen?! Just a thought.

Kathy


Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Geary, Stephanie
Sent: Friday, November 04, 2005 7:57 AM
To: vantage@yahoogroups.com
Subject: Spam:RE: Spam:RE: Spam:RE: [Vantage] Re: How to issue finished
manufactured part back to job


That is odd. We have been doing for a long time I thought since 5.1 and
I always remember it being there... we are on 6.1 now so maybe I just
think I remember. It isn't on the "Mfg. Receipt" button. That still
isn't highlighted. You have to look at the "Job" button with Job Header
and it shows a quantity in "Rcv'd to Stock" field.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Kathy Hambleton
Sent: Thursday, November 03, 2005 5:01 PM
To: vantage@yahoogroups.com
Subject: RE: Spam:RE: Spam:RE: [Vantage] Re: How to issue finished
manufactured part back to job


Unfortunately not for us. We are still on Version 5.2, maybe that has
something to do with it. I just tested it out and on the job where I
moved the parts from, the only place I can see that transaction is on
the production detail report. We are planning to move to 6.1 very soon
so maybe we can look into using this transaction process again.

Kathy


Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Geary, Stephanie
Sent: Thursday, November 03, 2005 3:45 PM
To: vantage@yahoogroups.com
Subject: Spam:RE: Spam:RE: [Vantage] Re: How to issue finished
manufactured part back to job


It is on the Job display as well. It shows it as if it went to stock.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Kathy Hambleton
Sent: Thursday, November 03, 2005 3:42 PM
To: vantage@yahoogroups.com
Subject: RE: Spam:RE: [Vantage] Re: How to issue finished manufactured
part back to job


Here's my two cents on this process. We used WIP-to-WIP transaction
quite a bit, however it was causing all kinds of problems at the job
close process. When you bring up a job to be closed in the job closed
screen, our first check is to make sure our quantity completed equals
quantity shipped plus quantity inventoried. Well the WIP-to-WIP
transaction is not accounted for in this screen, so the person in charge
of closing jobs was going nuts because they couldn't figure out where
the balance of parts went. The only place that you can see this
transaction is in the production detail report for the job. It was
enough of a pain in the neck that we stop using the transaction and now
move everything to inventory and immediately issue to another job.

Kathy


Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Geary, Stephanie
Sent: Thursday, November 03, 2005 9:39 AM
To: vantage@yahoogroups.com
Subject: Spam:RE: [Vantage] Re: How to issue finished manufactured part
back to job


Well I couldn't actually tell what you were trying to do. If we have a
work order that the cost should go to another work order for whatever
reason instead of posting it to stock and then issuing the part to the
work order (affecting weighted average for us) we basically post it
directly to the next work order. You need to have a material line on
the second work order to receive the part(s). Try it in your training
database. It works very well for us. The transaction is represented as
a WIP-to-WIP on the second w/o on the material line. On the original
w/o it shows on that it was posted to "stk". on the w/o header. The
cost flow from on w/o directly to the other. I don't know if that made
any sense but if you need me to I could create a kinda flow chart to
represent what I am talking about.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of sharma_nalini
Sent: Thursday, November 03, 2005 9:31 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: How to issue finished manufactured part back to
job


HI, Can you pelase explain it little more


WIP to WIP transaction means?

FOR us WIP is just one warehouse where the the uncompleted quantity
for the part is sitting.


--- In vantage@yahoogroups.com, "Geary, Stephanie" <sgeary@k...>
wrote:
>
> You could use Wip to Wip transaction. You would post from the sub
work order to the final work order. Using Receipts from
Manufacturing. And Receive to Job.
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On
Behalf
> Of sharma_nalini
> Sent: Thursday, November 03, 2005 9:13 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] How to issue finished manufactured part back to
job
>
>
> HI All,
>
> We have some parts in WIP warehouse we would liek to issue them
back to
> job , I tried to do it through Issue to job, Job adjustment but
didnot
> find any option.
>
> Does any one have Idea?
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>







Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links








Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Manufacturing < http://groups.yahoo.com/gads?t=ms <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufactu
ring+software&w2=Membership+database+software&w3=Pda+database+software&w
4=Database+management+software&w5=Database+marketing+software&w6=Online+
database+software&c=6&s=186&.sig=UMpdmPFoAvQNOm7UNvkXtA>
&k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+databa
se+software&w3=Pda+database+software&w4=Database+management+software&w5=
Database+marketing+software&w6=Online+database+software&c=6&s=186&.sig=U
MpdmPFoAvQNOm7UNvkXtA>
&k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+databa
se+software&w3=Pda+database+software&w4=Database+management+software&w5=
Database+marketing+software&w6=Online+database+software&c=6&s=186&.sig=U
MpdmPFoAvQNOm7UNvkXtA&g t; software Membership <
http://groups.yaho < http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Pda+database+soft
ware&w4=Database+management+software&w5=Database+marketing+software&w6=O
nline+database+software&c=6&s=186&.sig=C37ckDb-SMP71iiKv60uHw>
&k=Membership+database+software&w1=Manufacturing+software&w2=Membership+
database+software&w3=Pda+database+software&w4=Database+management+softwa
re&w5=Database+marketing+software&w6=Online+database+software&c=6&s=186&
.sig=C37ckDb-SMP71iiKv60uHw>
o.com/gads?t=ms&k=Membership+database+software&w1=Manufacturing+software
&w2=Membership+database+software&w3=Pda+database+software&w4=Database+ma
nagement+software&w5=Database+marketing+software&w6=Online+database+soft
w are&c=6&s=186&.sig=C37ckDb-SMP71iiKv60uHw> database software Pda
< http://groups.yahoo.com/gads?t=ms < http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufactur
ing+software&w2=Membership+database+software&w3=Pda+database+software&w4
=Database+management+software&w5=Database+marketing+software&w6=Online+d
atabase+software&c=6&s=186&.sig=RQRH4LA-LSse5hDYHZEeXw>
&k=Pda+database+software&w1=Manufacturing+software&w2=Membership+databas
e+software&w3=Pda+database+software&w4=Database+management+software&w5=D
atabase+marketing+software&w6=Online+database+software&c=6&s=186&.sig=RQ
RH4LA-LSse5hDYHZEeXw>
&k=Pda+database+software&w1=Manufacturing+software&w2=Membership+databas
e+software&w3=Pda+database+software&w4=Database+management+software&w5=D
atabase+ma
rketing+software&w6=Online+database+software&c=6&s=186&.sig=RQRH4LA-LSse
5hDYHZEeXw> database software &nb sp;
Database < http://groups.yahoo.com/gads?t=ms <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Pda+database+soft
ware&w4=Database+management+software&w5=Database+marketing+software&w6=O
nline+database+software&c=6&s=186&.sig=We7WT9skRvovj5VSiINIJw>
&k=Database+management+software&w1=Manufacturing+software&w2=Membership+
database+software&w3=Pda+database+software&w4=Database+management+softwa
re&w5=Database+marketing+software&w6=Online+database+software&c=6&s=186&
.sig=We7WT9skRvovj5VSiINIJw>
&k=Database+management+software&w1=Manufacturing+software&w2=Membership+
database+software&w3=Pda+database+software&w4=Database+management+softwa
re&w5=Database+marketing+software&w6=Online+database+software&c=6&s=186&
.sig=We7WT9skRvo vj5VSiINIJw> management software Database < htt
< http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manu
facturing+software&w2=Membership+database+software&w3=Pda+database+softw
are&w4=Database+management+software&w5=Database+marketing+software&w6=On
line+database+software&c=6&s=186&.sig=J93TSxlI3Odqy7KYRMKsmA>
&k=Database+marketing+software&w1=Manufacturing+software&w2=Membership+d
atabase+software&w3=Pda+database+software&w4=Database+management+softwar
e&w5=Database+marketing+software&w6=Online+database+software&c=6&s=186&.
sig=J93TSxlI3Odqy7KYRMKsmA>
p://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manufact
uring+software&w2=Membership+database+software&w3=Pda+database+software&
w4=Database+management+software&w5=Database+marketing+software&w6=Online
+database+software&c=6&am p;s=186&.sig=J93TSxlI3Odqy7KYRMKsmA> marketing
software Online < http://groups.yahoo.com/gads?t=ms <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Online+database+software&w1=Manufac
turing+software&w2=Membership+database+software&w3=Pda+database+software
&w4=Database+management+software&w5=Database+marketing+software&w6=Onlin
e+database+software&c=6&s=186&.sig=po8zPURylyGRTQsgLRjIsQ>
&k=Online+database+software&w1=Manufacturing+software&w2=Membership+data
base+software&w3=Pda+database+software&w4=Database+management+software&w
5=Database+marketing+software&w6=Online+database+software&c=6&s=186&.sig
=po8zPURylyGRTQsgLRjIsQ>
&k=Online+database+software&w1=Manufacturing+software&w2=Membership+data
base+software&w3=Pda+database+software&w4=Database+management+software&w
5=Database+mar
keting+software&w6=Online+database+software&c=6&s=186&.sig=po8zPURylyGRT
QsgLRjIsQ&g t; database software

_____

YAHOO! GROUPS LINKS



* Visit your group " vantage <
http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service < http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links








Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Manufacturing < http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufactu
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w4=Pda+database+software&w5=Online+database+software&w6=Custom+datab
ase+software&c=6&s=181&.sig=97SUvzouCLN875l6_zbhMg>
&k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+databa
se+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=On
line+database+software&w6=Custom+database+software&c=6&s=181&.sig=97SUvz
ouCLN875l6_zbhMg> software Membership <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Online+database+software&w6=Custom
+database+software&c=6&s=181&.sig=5Ryr25P8j0PXT23fFuBi3w>
&k=Membership+database+software&w1=Manufacturing+software&w2=Membership+
database+software&w3=Database+mortgage+software&w4=Pda+database+software
&w5=Online+database+software&w6=Custom+database+software&c=6&s=181&.sig=
5Ryr25P8j0PXT23fFuBi3w> database software Database <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manuf
acturing+software&w2=Membership+database+software&w3=Database+mortgage+s
oftware&w4=Pda+database+software&w5=Online+database+software&w6=Custom+d
atabase+software&c=6&s=181&.sig=hm2MVYopWrq2-Vh1a5kXLw>
&k=Database+mortgage+software&w1=Manufacturing+software&w2=Membership+da
tabase+software&w3=Database+mortgage+software&w4=Pda+database+software&w
5=Online+database+software&w6=Custom+database+software&c=6&s=181&.sig=hm
2MVYopWrq2-Vh1a5kXLw> mortgage software
Pda < http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufactur
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4=Pda+database+software&w5=Online+database+software&w6=Custom+databa
se+software&c=6&s=181&.sig=xeTh6Fp3NnQKfsi_kDhSzg>
&k=Pda+database+software&w1=Manufacturing+software&w2=Membership+databas
e+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Onl
ine+database+software&w6=Custom+database+software&c=6&s=181&.sig=xeTh6Fp
3NnQKfsi_kDhSzg> database software Online <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Online+database+software&w1=Manufac
turing+software&w2=Membership+database+software&w3=Database+mortgage+sof
tware&w4=Pda+database+software&w5=Online+database+software&w6=Custom+dat
abase+software&c=6&s=181&.sig=AzHNwZjXKsMQzONy9Hps5w> &k=Onli
ne+database+software&w1=Manufacturing+software&w2=Membership+database+so
ftware&w3=Database+mortgage+software&w4=Pda+database+software&w5=Online+
database+software&w6=Custom+database+software&c=6&s=181&.sig=AzHNwZjXKsM
QzONy9Hps5w> database software Custom <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Custom+database+software&w1=Manufac
turing+software&w2=Membership+database+software&w3=Database+mortgage+sof
tware&w4=Pda+database+software&w5=Online+database+software&w6=Custom+dat
abase+software&c=6&s=181&.sig=x385Iq1mMXR46DJKUflmGA>
&k=Custom+database+software&w1=Manufacturing+software&w2=Membership+data
base+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=
Online+database+software&w6=Custom+database+software&c=6&s=181&.sig=x385
Iq1mMXR46DJKUflmGA> database software

_____

YAHOO! GROUPS LINKS



* Visit your group " vantage <
http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service < http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links








Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



_____

YAHOO! GROUPS LINKS



* Visit your group " vantage
<http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
Stephanie,

You are right, it is there. I'm not sure I would have ever found it
without someone pointing it out. However, it still requires more
digging at job closing to see that all the pieces were accounted for.
Wouldn't be nice if it showed up in the recv'd to stock field in the job
close screen?! Just a thought.

Kathy


Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Geary, Stephanie
Sent: Friday, November 04, 2005 7:57 AM
To: vantage@yahoogroups.com
Subject: Spam:RE: Spam:RE: Spam:RE: [Vantage] Re: How to issue finished
manufactured part back to job


That is odd. We have been doing for a long time I thought since 5.1 and
I always remember it being there... we are on 6.1 now so maybe I just
think I remember. It isn't on the "Mfg. Receipt" button. That still
isn't highlighted. You have to look at the "Job" button with Job Header
and it shows a quantity in "Rcv'd to Stock" field.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Kathy Hambleton
Sent: Thursday, November 03, 2005 5:01 PM
To: vantage@yahoogroups.com
Subject: RE: Spam:RE: Spam:RE: [Vantage] Re: How to issue finished
manufactured part back to job


Unfortunately not for us. We are still on Version 5.2, maybe that has
something to do with it. I just tested it out and on the job where I
moved the parts from, the only place I can see that transaction is on
the production detail report. We are planning to move to 6.1 very soon
so maybe we can look into using this transaction process again.

Kathy


Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Geary, Stephanie
Sent: Thursday, November 03, 2005 3:45 PM
To: vantage@yahoogroups.com
Subject: Spam:RE: Spam:RE: [Vantage] Re: How to issue finished
manufactured part back to job


It is on the Job display as well. It shows it as if it went to stock.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Kathy Hambleton
Sent: Thursday, November 03, 2005 3:42 PM
To: vantage@yahoogroups.com
Subject: RE: Spam:RE: [Vantage] Re: How to issue finished manufactured
part back to job


Here's my two cents on this process. We used WIP-to-WIP transaction
quite a bit, however it was causing all kinds of problems at the job
close process. When you bring up a job to be closed in the job closed
screen, our first check is to make sure our quantity completed equals
quantity shipped plus quantity inventoried. Well the WIP-to-WIP
transaction is not accounted for in this screen, so the person in charge
of closing jobs was going nuts because they couldn't figure out where
the balance of parts went. The only place that you can see this
transaction is in the production detail report for the job. It was
enough of a pain in the neck that we stop using the transaction and now
move everything to inventory and immediately issue to another job.

Kathy


Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Geary, Stephanie
Sent: Thursday, November 03, 2005 9:39 AM
To: vantage@yahoogroups.com
Subject: Spam:RE: [Vantage] Re: How to issue finished manufactured part
back to job


Well I couldn't actually tell what you were trying to do. If we have a
work order that the cost should go to another work order for whatever
reason instead of posting it to stock and then issuing the part to the
work order (affecting weighted average for us) we basically post it
directly to the next work order. You need to have a material line on
the second work order to receive the part(s). Try it in your training
database. It works very well for us. The transaction is represented as
a WIP-to-WIP on the second w/o on the material line. On the original
w/o it shows on that it was posted to "stk". on the w/o header. The
cost flow from on w/o directly to the other. I don't know if that made
any sense but if you need me to I could create a kinda flow chart to
represent what I am talking about.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of sharma_nalini
Sent: Thursday, November 03, 2005 9:31 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: How to issue finished manufactured part back to
job


HI, Can you pelase explain it little more


WIP to WIP transaction means?

FOR us WIP is just one warehouse where the the uncompleted quantity
for the part is sitting.


--- In vantage@yahoogroups.com, "Geary, Stephanie" <sgeary@k...>
wrote:
>
> You could use Wip to Wip transaction. You would post from the sub
work order to the final work order. Using Receipts from
Manufacturing. And Receive to Job.
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On
Behalf
> Of sharma_nalini
> Sent: Thursday, November 03, 2005 9:13 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] How to issue finished manufactured part back to
job
>
>
> HI All,
>
> We have some parts in WIP warehouse we would liek to issue them
back to
> job , I tried to do it through Issue to job, Job adjustment but
didnot
> find any option.
>
> Does any one have Idea?
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>







Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links








Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Manufacturing < http://groups.yahoo.com/gads?t=ms <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufactu
ring+software&w2=Membership+database+software&w3=Pda+database+software&w
4=Database+management+software&w5=Database+marketing+software&w6=Online+
database+software&c=6&s=186&.sig=UMpdmPFoAvQNOm7UNvkXtA>
&k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+databa
se+software&w3=Pda+database+software&w4=Database+management+software&w5=
Database+marketing+software&w6=Online+database+software&c=6&s=186&.sig=U
MpdmPFoAvQNOm7UNvkXtA>
&k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+databa
se+software&w3=Pda+database+software&w4=Database+management+software&w5=
Database+marketing+software&w6=Online+database+software&c=6&s=186&.sig=U
MpdmPFoAvQNOm7UNvkXtA&g t; software Membership <
http://groups.yaho < http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Pda+database+soft
ware&w4=Database+management+software&w5=Database+marketing+software&w6=O
nline+database+software&c=6&s=186&.sig=C37ckDb-SMP71iiKv60uHw>
&k=Membership+database+software&w1=Manufacturing+software&w2=Membership+
database+software&w3=Pda+database+software&w4=Database+management+softwa
re&w5=Database+marketing+software&w6=Online+database+software&c=6&s=186&
.sig=C37ckDb-SMP71iiKv60uHw>
o.com/gads?t=ms&k=Membership+database+software&w1=Manufacturing+software
&w2=Membership+database+software&w3=Pda+database+software&w4=Database+ma
nagement+software&w5=Database+marketing+software&w6=Online+database+soft
w are&c=6&s=186&.sig=C37ckDb-SMP71iiKv60uHw> database software Pda
< http://groups.yahoo.com/gads?t=ms < http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufactur
ing+software&w2=Membership+database+software&w3=Pda+database+software&w4
=Database+management+software&w5=Database+marketing+software&w6=Online+d
atabase+software&c=6&s=186&.sig=RQRH4LA-LSse5hDYHZEeXw>
&k=Pda+database+software&w1=Manufacturing+software&w2=Membership+databas
e+software&w3=Pda+database+software&w4=Database+management+software&w5=D
atabase+marketing+software&w6=Online+database+software&c=6&s=186&.sig=RQ
RH4LA-LSse5hDYHZEeXw>
&k=Pda+database+software&w1=Manufacturing+software&w2=Membership+databas
e+software&w3=Pda+database+software&w4=Database+management+software&w5=D
atabase+ma
rketing+software&w6=Online+database+software&c=6&s=186&.sig=RQRH4LA-LSse
5hDYHZEeXw> database software &nb sp;
Database < http://groups.yahoo.com/gads?t=ms <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Pda+database+soft
ware&w4=Database+management+software&w5=Database+marketing+software&w6=O
nline+database+software&c=6&s=186&.sig=We7WT9skRvovj5VSiINIJw>
&k=Database+management+software&w1=Manufacturing+software&w2=Membership+
database+software&w3=Pda+database+software&w4=Database+management+softwa
re&w5=Database+marketing+software&w6=Online+database+software&c=6&s=186&
.sig=We7WT9skRvovj5VSiINIJw>
&k=Database+management+software&w1=Manufacturing+software&w2=Membership+
database+software&w3=Pda+database+software&w4=Database+management+softwa
re&w5=Database+marketing+software&w6=Online+database+software&c=6&s=186&
.sig=We7WT9skRvo vj5VSiINIJw> management software Database < htt
< http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manu
facturing+software&w2=Membership+database+software&w3=Pda+database+softw
are&w4=Database+management+software&w5=Database+marketing+software&w6=On
line+database+software&c=6&s=186&.sig=J93TSxlI3Odqy7KYRMKsmA>
&k=Database+marketing+software&w1=Manufacturing+software&w2=Membership+d
atabase+software&w3=Pda+database+software&w4=Database+management+softwar
e&w5=Database+marketing+software&w6=Online+database+software&c=6&s=186&.
sig=J93TSxlI3Odqy7KYRMKsmA>
p://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manufact
uring+software&w2=Membership+database+software&w3=Pda+database+software&
w4=Database+management+software&w5=Database+marketing+software&w6=Online
+database+software&c=6&am p;s=186&.sig=J93TSxlI3Odqy7KYRMKsmA> marketing
software Online < http://groups.yahoo.com/gads?t=ms <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Online+database+software&w1=Manufac
turing+software&w2=Membership+database+software&w3=Pda+database+software
&w4=Database+management+software&w5=Database+marketing+software&w6=Onlin
e+database+software&c=6&s=186&.sig=po8zPURylyGRTQsgLRjIsQ>
&k=Online+database+software&w1=Manufacturing+software&w2=Membership+data
base+software&w3=Pda+database+software&w4=Database+management+software&w
5=Database+marketing+software&w6=Online+database+software&c=6&s=186&.sig
=po8zPURylyGRTQsgLRjIsQ>
&k=Online+database+software&w1=Manufacturing+software&w2=Membership+data
base+software&w3=Pda+database+software&w4=Database+management+software&w
5=Database+mar
keting+software&w6=Online+database+software&c=6&s=186&.sig=po8zPURylyGRT
QsgLRjIsQ&g t; database software

_____

YAHOO! GROUPS LINKS



* Visit your group " vantage <
http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service < http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links








Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Manufacturing < http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufactu
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w4=Pda+database+software&w5=Online+database+software&w6=Custom+datab
ase+software&c=6&s=181&.sig=97SUvzouCLN875l6_zbhMg>
&k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+databa
se+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=On
line+database+software&w6=Custom+database+software&c=6&s=181&.sig=97SUvz
ouCLN875l6_zbhMg> software Membership <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Online+database+software&w6=Custom
+database+software&c=6&s=181&.sig=5Ryr25P8j0PXT23fFuBi3w>
&k=Membership+database+software&w1=Manufacturing+software&w2=Membership+
database+software&w3=Database+mortgage+software&w4=Pda+database+software
&w5=Online+database+software&w6=Custom+database+software&c=6&s=181&.sig=
5Ryr25P8j0PXT23fFuBi3w> database software Database <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manuf
acturing+software&w2=Membership+database+software&w3=Database+mortgage+s
oftware&w4=Pda+database+software&w5=Online+database+software&w6=Custom+d
atabase+software&c=6&s=181&.sig=hm2MVYopWrq2-Vh1a5kXLw>
&k=Database+mortgage+software&w1=Manufacturing+software&w2=Membership+da
tabase+software&w3=Database+mortgage+software&w4=Pda+database+software&w
5=Online+database+software&w6=Custom+database+software&c=6&s=181&.sig=hm
2MVYopWrq2-Vh1a5kXLw> mortgage software
Pda < http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufactur
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4=Pda+database+software&w5=Online+database+software&w6=Custom+databa
se+software&c=6&s=181&.sig=xeTh6Fp3NnQKfsi_kDhSzg>
&k=Pda+database+software&w1=Manufacturing+software&w2=Membership+databas
e+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Onl
ine+database+software&w6=Custom+database+software&c=6&s=181&.sig=xeTh6Fp
3NnQKfsi_kDhSzg> database software Online <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Online+database+software&w1=Manufac
turing+software&w2=Membership+database+software&w3=Database+mortgage+sof
tware&w4=Pda+database+software&w5=Online+database+software&w6=Custom+dat
abase+software&c=6&s=181&.sig=AzHNwZjXKsMQzONy9Hps5w> &k=Onli
ne+database+software&w1=Manufacturing+software&w2=Membership+database+so
ftware&w3=Database+mortgage+software&w4=Pda+database+software&w5=Online+
database+software&w6=Custom+database+software&c=6&s=181&.sig=AzHNwZjXKsM
QzONy9Hps5w> database software Custom <
http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Custom+database+software&w1=Manufac
turing+software&w2=Membership+database+software&w3=Database+mortgage+sof
tware&w4=Pda+database+software&w5=Online+database+software&w6=Custom+dat
abase+software&c=6&s=181&.sig=x385Iq1mMXR46DJKUflmGA>
&k=Custom+database+software&w1=Manufacturing+software&w2=Membership+data
base+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=
Online+database+software&w6=Custom+database+software&c=6&s=181&.sig=x385
Iq1mMXR46DJKUflmGA> database software

_____

YAHOO! GROUPS LINKS



* Visit your group " vantage <
http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service < http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links








Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



_____

YAHOO! GROUPS LINKS



* Visit your group " vantage
<http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]