Advanced Material Management V6.1

Yahoo Archive
1
My understanding is they are intentionally lost.
The way I understand it, the AMM is intended to make parts available to the
next operation, not to track the details of what enabled them to be
available.
I wanted the ability to report scrap with report qty button, but the above
was an abbreviated version of why I was told it would not be included as an
enhancement.
I know, this is not what you are looking for, but it's my understanding at
this point.
Aaron Hoyt
Vantage Plastics

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Lou Laird
Sent: Wednesday, March 01, 2006 12:46 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Advanced Material Management V6.1


That is exactly the problem, the WIP tab. We understand it, what we have is
material disappearing from the WIP tab, I believe its because the next
operation is being marked complete so any previous operation WIP is cleaned
up. Also once a job is closed all history of the AMM moves are lost. Does
anyone know if they are saved/

Aaron Hoyt <aaron.hoyt@...> wrote: Yes we are using it.
Can you be more specific on what type of problem. We
find the WIP tab a bit confusing and don't use it much, but what
specifically are you noticing?
Aaron Hoyt
Vantage Plastics

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Lou Laird
Sent: Monday, February 27, 2006 8:17 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Advanced Material Management V6.1


Is anyone using the AMM in V6.1. If so are you having any problems with the
WIP tab in the part tracker screen?


---------------------------------
Relax. Yahoo! Mail virus scanning helps detect nasty viruses!

[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



SPONSORED LINKS
Manufacturing software Membership database software Database
mortgage software Pda database software Database management software
Database marketing software

---------------------------------
YAHOO! GROUPS LINKS


Visit your group "vantage" on the web.

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


---------------------------------





---------------------------------
Yahoo! Mail
Bring photos to life! New PhotoMail makes sharing a breeze.

[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
2
We are new 8.0 Vantage users and have been anxious to use CorVu.
Epicor finally got it installed but I don't know how to load our data
into it. Can anyone out there help me? We've been waiting for
someone from the proper department at Epicor to call us but so far
they have more important things to do. Also, can I get an opinion on
whether the Epicor training is recommended?
Thanks,
Mike
3
Hi,

When epicor installed it they should have setup some batch files to
schedule the extraction. You should be able to view these through
windows scheduled tasks.

If the data hasn't been extracted at all then there is a particular
order to do the first extraction. Epicor should be able to tell you
over the phone.

Check that there is a schedule task operating.

Brychan


--- In vantage@yahoogroups.com, "Mike Haynes" <mikeh@...> wrote:
>
> We are new 8.0 Vantage users and have been anxious to use CorVu.
> Epicor finally got it installed but I don't know how to load our
data
> into it. Can anyone out there help me? We've been waiting for
> someone from the proper department at Epicor to call us but so far
> they have more important things to do. Also, can I get an opinion
on
> whether the Epicor training is recommended?
> Thanks,
> Mike
>
4
Is anyone using the AMM in V6.1. If so are you having any problems with the WIP tab in the part tracker screen?


---------------------------------
Relax. Yahoo! Mail virus scanning helps detect nasty viruses!

[Non-text portions of this message have been removed]
5
Yes we are using it. Can you be more specific on what type of problem. We
find the WIP tab a bit confusing and don't use it much, but what
specifically are you noticing?
Aaron Hoyt
Vantage Plastics

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Lou Laird
Sent: Monday, February 27, 2006 8:17 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Advanced Material Management V6.1


Is anyone using the AMM in V6.1. If so are you having any problems with the
WIP tab in the part tracker screen?


---------------------------------
Relax. Yahoo! Mail virus scanning helps detect nasty viruses!

[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
6
That is exactly the problem, the WIP tab. We understand it, what we have is material disappearing from the WIP tab, I believe its because the next operation is being marked complete so any previous operation WIP is cleaned up. Also once a job is closed all history of the AMM moves are lost. Does anyone know if they are saved/

Aaron Hoyt <aaron.hoyt@...> wrote: Yes we are using it. Can you be more specific on what type of problem. We
find the WIP tab a bit confusing and don't use it much, but what
specifically are you noticing?
Aaron Hoyt
Vantage Plastics

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Lou Laird
Sent: Monday, February 27, 2006 8:17 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Advanced Material Management V6.1


Is anyone using the AMM in V6.1. If so are you having any problems with the
WIP tab in the part tracker screen?


---------------------------------
Relax. Yahoo! Mail virus scanning helps detect nasty viruses!

[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



SPONSORED LINKS
Manufacturing software Membership database software Database mortgage software Pda database software Database management software Database marketing software

---------------------------------
YAHOO! GROUPS LINKS


Visit your group "vantage" on the web.

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


---------------------------------





---------------------------------
Yahoo! Mail
Bring photos to life! New PhotoMail makes sharing a breeze.

[Non-text portions of this message have been removed]