Just curious:
Are the subassemblies coded "Nonstock" ?
David Kaufman
CNC Metal Products
Are the subassemblies coded "Nonstock" ?
David Kaufman
CNC Metal Products
> -----Original Message-----[Non-text portions of this message have been removed]
> From: vantage@yahoogroups.com [SMTP:vantage@yahoogroups.com] On Behalf Of Darren Mann
> Sent: Wednesday, June 08, 2005 4:36 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Auto receipt into inventory problem
>
> True ..BUT it still moves those 15 parts to inventory then out of inventory
> when you use the 10 for the top assembly...
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
> Of Jasper Recto
> Sent: Wednesday, June 08, 2005 2:37 PM
> To: Darren Mann
> Subject: RE: [Vantage] Auto receipt into inventory problem
>
>
> Only over quantities of a Subassembly. If it is the top assembly then all
> parts go into inventory. When a subassembly is produced, it does not come
> out of WIP. It stays in WIP because it is a material requirement for
> another assembly. If a job require 10 pieces of a subassembly and you
> produce 15 then 10 become the material requirement for it's parent assembly
> and the remaining 5 should go into inventory IF it is set for auto receive.
>
> The problem we have is that ALL pieces of a subassembly are going into
> inventory and not continuing on to the next stage.
>
> Jasper
>
> -----Original Message-----
> From: Russ Dover [mailto:rdover@...]
> Sent: Wednesday, June 08, 2005 2:52 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Auto receipt into inventory problem
>
>
> Jasper
> We do very little Auto receive at WI but my understanding is that
> completed parts go straight to inventory when completed in a "Auto
> Receive" operation. I'm not sure where you see that only over
> quantity goes to inventory.
> HTH
> Russ Dover
> Weaver Industries
>
>
> To: <vantage@yahoogroups.com>
> From: "Jasper Recto" <jrecto@...>
> Date sent: Wed, 8 Jun 2005 12:58:01 -0400
> Subject: RE: [Vantage] Auto receipt into inventory problem
> Send reply to: vantage@yahoogroups.com
>
> > No we don't. I wish we did thou!
> >
> > Jasper
> >
> > -----Original Message-----
> > From: Aaron Hoyt [mailto:aaron.hoyt@...]
> > Sent: Wednesday, June 08, 2005 12:50 PM
> > To: vantage@yahoogroups.com
> > Subject: RE: [Vantage] Auto receipt into inventory problem
> >
> >
> > Jasper,
> > You don't happen to have AMM do you?
> > Aaron Hoyt
> > Vantage Plastics
> >
> > -----Original Message-----
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of
> > Jasper Recto
> > Sent: Wednesday, June 08, 2005 12:04 PM
> > To: vantage@yahoogroups.com
> > Subject: RE: [Vantage] Auto receipt into inventory problem
> >
> >
> > This part is not the top assembly. It is a subassembly. Even though it's
> > set as final operation/auto receive, the only quantities that should go
> into
> > inventory are the quantities that exceed the run quantity. The rest just
> > stays with the job and goes to the top assembly.
> >
> > Any ideas why this is happening?
> > Jasper
> >
> > -----Original Message-----
> > From: Darren Mann [mailto:dmann@...]
> > Sent: Wednesday, June 08, 2005 12:00 PM
> > To: vantage@yahoogroups.com
> > Subject: RE: [Vantage] Auto receipt into inventory problem
> >
> >
> > Were the 557 pieces entered on someones labor entry record from
> timekeeping?
> > The parts would be moved to inventory as those values are keyed in. Let's
> > say the first day of running those parts they completed 100 pcs. When you
> > enter that in Labor entry for that operaton flagged as the final operation
> > and checked to auto recieve to inventory those 100 pieces are moved to
> > inventory. The next day they do 150...and so on..happens wwhen those
> > entries are made in Labor Entry.
> >
> > -----Original Message-----
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of>
> > Jasper Recto
> > Sent: Wednesday, June 08, 2005 10:32 AM
> > To: Darren Mann
> > Subject: RE: [Vantage] Auto receipt into inventory problem
> >
> >
> > I'm not sure I understand what you mean.
> >
> > The run quantity was for 600 pieces. To date, only 557 have been
> completed
> > but all have auto received into inventory.
> >
> > Jasper
> >
> > -----Original Message-----
> > From: Darren Mann [mailto:dmann@...]
> > Sent: Wednesday, June 08, 2005 11:05 AM
> > To: vantage@yahoogroups.com
> > Subject: RE: [Vantage] Auto receipt into inventory problem
> >
> >
> > Do you enter labor qty's against the final operation as it is being
> > completed. It will move partials if you do so.
> >
> > -----Original Message-----
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of
> > Jasper Recto
> > Sent: Wednesday, June 08, 2005 9:57 AM
> > To: Darren Mann
> > Subject: [Vantage] Auto receipt into inventory problem
> >
> >
> > We have a job that that has several subassemblies. One of our
> > subassemblies keeps auto receiving itself after the final operation even
> > though the completed quantity has not exceeded the run quantity. The
> final
> > operation is set for auto receipt but since it is a subassembly, shouldn't
> > that only automatically happen when it exceeds it run quantity.
> >
> > Any ideas?
> >
> > Thanks,
> > Jasper
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> > already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.323 / Virus Database: 267.6.5 - Release Date: 6/7/2005
> >
> >
> > --
> > No virus found in this outgoing message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.323 / Virus Database: 267.6.5 - Release Date: 6/7/2005
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> > already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> > already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.323 / Virus Database: 267.6.6 - Release Date: 6/8/2005
> >
> >
> > --
> > No virus found in this outgoing message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.323 / Virus Database: 267.6.6 - Release Date: 6/8/2005>
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> > already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> > already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.6.6 - Release Date: 6/8/2005
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.6.6 - Release Date: 6/8/2005
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )>
> (1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>