Epicor 9 Dump & Loads

It should make a big improvement on your system's performance.



Thanks,

Blake Clemens

IT Systems Engineer

Delmarva Millwork Corporation

(800) 360-2364 x132

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brad Ebright
Sent: Friday, March 26, 2010 1:36 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Epicor 9 Dump & Loads





Ok. Thanks. We have been running into a good bit of performance issues
and I
am hoping this will help out with some of those issues..

Thank You,

Brad Ebright
MGS Inc.
178 Muddy Creek Church Rd.
Denver, PA 17517
(717)336-7528

_____

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Troy Richman
Sent: Friday, March 26, 2010 1:15 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Epicor 9 Dump & Loads

I did one just recently on a 6 GB database for Epicor 9 and it took 3-4
hours.

Troy

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf Of Brad Ebright
Sent: March-26-10 10:13 AM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] Epicor 9 Dump & Loads

Not to Hijack the thread, but does anyone know how long it will take to
Dump
and Load a 4 GB database?

Thank You,

Brad Ebright
MGS Inc.
178 Muddy Creek Church Rd.
Denver, PA 17517
(717)336-7528

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com>
.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups
<mailto:vantage%40yahoogroups.com>
.com<mailto:vantage%40yahoogroups.com>]
On Behalf Of
David G
Sent: Friday, March 26, 2010 12:19 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com>
.com<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Epicor 9 Dump & Loads

We have been live on our Epicor 9 db for 5 months. The Epicor conversion
team converted our DB from Vantage 6 to Epicor 9. We have encountered
numerous issues since converting. Supports latest suggestion to fixing
some
of our issues is doing a dump and load. I ran the proutil mfgsys -C
tabanalys > stats.wri and discovered our data was at 7.3 out of 9
scattered
level. I questioned support on how the db could get so bad so quickly
and
wasn't really given a reason.
Wondering if any other Epicor 9 users have had similar issues with their
db
getting so scattered so quickly. I really don't want to do dump & loads
every quarter, specially since we hadn't had to do it on our Vantage 6
db in
the 3 years I've been with the company.

Thanks Dave

PS I think Epicor 9 is actually a Latin word meaning your IT guy will
work
every weekend patching updating after deploying it.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.791 / Virus Database: 271.1.1/2770 - Release Date: 03/26/10
03:33:00



[Non-text portions of this message have been removed]
We have been live on our Epicor 9 db for 5 months. The Epicor conversion team converted our DB from Vantage 6 to Epicor 9. We have encountered numerous issues since converting. Supports latest suggestion to fixing some of our issues is doing a dump and load. I ran the proutil mfgsys -C tabanalys > stats.wri and discovered our data was at 7.3 out of 9 scattered level. I questioned support on how the db could get so bad so quickly and wasn't really given a reason.
Wondering if any other Epicor 9 users have had similar issues with their db getting so scattered so quickly. I really don't want to do dump & loads every quarter, specially since we hadn't had to do it on our Vantage 6 db in the 3 years I've been with the company.

Thanks Dave

PS I think Epicor 9 is actually a Latin word meaning your IT guy will work every weekend patching updating after deploying it.
Not to Hijack the thread, but does anyone know how long it will take to Dump
and Load a 4 GB database?



Thank You,



Brad Ebright
MGS Inc.
178 Muddy Creek Church Rd.
Denver, PA 17517
(717)336-7528

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
David G
Sent: Friday, March 26, 2010 12:19 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Epicor 9 Dump & Loads





We have been live on our Epicor 9 db for 5 months. The Epicor conversion
team converted our DB from Vantage 6 to Epicor 9. We have encountered
numerous issues since converting. Supports latest suggestion to fixing some
of our issues is doing a dump and load. I ran the proutil mfgsys -C
tabanalys > stats.wri and discovered our data was at 7.3 out of 9 scattered
level. I questioned support on how the db could get so bad so quickly and
wasn't really given a reason.
Wondering if any other Epicor 9 users have had similar issues with their db
getting so scattered so quickly. I really don't want to do dump & loads
every quarter, specially since we hadn't had to do it on our Vantage 6 db in
the 3 years I've been with the company.

Thanks Dave

PS I think Epicor 9 is actually a Latin word meaning your IT guy will work
every weekend patching updating after deploying it.







[Non-text portions of this message have been removed]
I did one just recently on a 6 GB database for Epicor 9 and it took 3-4 hours.

Troy

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Brad Ebright
Sent: March-26-10 10:13 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Epicor 9 Dump & Loads



Not to Hijack the thread, but does anyone know how long it will take to Dump
and Load a 4 GB database?

Thank You,

Brad Ebright
MGS Inc.
178 Muddy Creek Church Rd.
Denver, PA 17517
(717)336-7528

_____

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
David G
Sent: Friday, March 26, 2010 12:19 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Epicor 9 Dump & Loads

We have been live on our Epicor 9 db for 5 months. The Epicor conversion
team converted our DB from Vantage 6 to Epicor 9. We have encountered
numerous issues since converting. Supports latest suggestion to fixing some
of our issues is doing a dump and load. I ran the proutil mfgsys -C
tabanalys > stats.wri and discovered our data was at 7.3 out of 9 scattered
level. I questioned support on how the db could get so bad so quickly and
wasn't really given a reason.
Wondering if any other Epicor 9 users have had similar issues with their db
getting so scattered so quickly. I really don't want to do dump & loads
every quarter, specially since we hadn't had to do it on our Vantage 6 db in
the 3 years I've been with the company.

Thanks Dave

PS I think Epicor 9 is actually a Latin word meaning your IT guy will work
every weekend patching updating after deploying it.

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
2-5 hours



Thanks,

Blake Clemens

IT Systems Engineer

Delmarva Millwork Corporation

(800) 360-2364 x132

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brad Ebright
Sent: Friday, March 26, 2010 1:13 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Epicor 9 Dump & Loads





Not to Hijack the thread, but does anyone know how long it will take to
Dump
and Load a 4 GB database?

Thank You,

Brad Ebright
MGS Inc.
178 Muddy Creek Church Rd.
Denver, PA 17517
(717)336-7528

_____

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of
David G
Sent: Friday, March 26, 2010 12:19 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Epicor 9 Dump & Loads

We have been live on our Epicor 9 db for 5 months. The Epicor conversion
team converted our DB from Vantage 6 to Epicor 9. We have encountered
numerous issues since converting. Supports latest suggestion to fixing
some
of our issues is doing a dump and load. I ran the proutil mfgsys -C
tabanalys > stats.wri and discovered our data was at 7.3 out of 9
scattered
level. I questioned support on how the db could get so bad so quickly
and
wasn't really given a reason.
Wondering if any other Epicor 9 users have had similar issues with their
db
getting so scattered so quickly. I really don't want to do dump & loads
every quarter, specially since we hadn't had to do it on our Vantage 6
db in
the 3 years I've been with the company.

Thanks Dave

PS I think Epicor 9 is actually a Latin word meaning your IT guy will
work
every weekend patching updating after deploying it.

[Non-text portions of this message have been removed]



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.791 / Virus Database: 271.1.1/2770 - Release Date: 03/26/10
03:33:00



[Non-text portions of this message have been removed]
Ok. Thanks. We have been running into a good bit of performance issues and I
am hoping this will help out with some of those issues..



Thank You,



Brad Ebright
MGS Inc.
178 Muddy Creek Church Rd.
Denver, PA 17517
(717)336-7528

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Troy Richman
Sent: Friday, March 26, 2010 1:15 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Epicor 9 Dump & Loads





I did one just recently on a 6 GB database for Epicor 9 and it took 3-4
hours.

Troy

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf Of Brad Ebright
Sent: March-26-10 10:13 AM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] Epicor 9 Dump & Loads

Not to Hijack the thread, but does anyone know how long it will take to Dump
and Load a 4 GB database?

Thank You,

Brad Ebright
MGS Inc.
178 Muddy Creek Church Rd.
Denver, PA 17517
(717)336-7528

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com>
.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups
<mailto:vantage%40yahoogroups.com> .com<mailto:vantage%40yahoogroups.com>]
On Behalf Of
David G
Sent: Friday, March 26, 2010 12:19 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com>
.com<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Epicor 9 Dump & Loads

We have been live on our Epicor 9 db for 5 months. The Epicor conversion
team converted our DB from Vantage 6 to Epicor 9. We have encountered
numerous issues since converting. Supports latest suggestion to fixing some
of our issues is doing a dump and load. I ran the proutil mfgsys -C
tabanalys > stats.wri and discovered our data was at 7.3 out of 9 scattered
level. I questioned support on how the db could get so bad so quickly and
wasn't really given a reason.
Wondering if any other Epicor 9 users have had similar issues with their db
getting so scattered so quickly. I really don't want to do dump & loads
every quarter, specially since we hadn't had to do it on our Vantage 6 db in
the 3 years I've been with the company.

Thanks Dave

PS I think Epicor 9 is actually a Latin word meaning your IT guy will work
every weekend patching updating after deploying it.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]