# Job Operation - Labor Hrs

It's a little confusing. If you set up your Job Management Module (under
company configuration) to calculate TIME as hours/hundredths, then time
calculations for labor will be done in hundredths. BUT you will still have
minutes/piece and so on--even though your Production detail report will show
hundredths. Hundredths makes it much easier to do calculations in time.

Lydia

-----Original Message-----
From: Robert Dillon [mailto:robert.dillon@...]
Sent: Monday, October 24, 2005 6:12 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Re: Job Operation - Labor Hrs

As far as I know, all the hours in the system will be in hundredths.

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of progress92000
Sent: Monday, October 24, 2005 9:10 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Job Operation - Labor Hrs

Thank you,

So the labor hrs is based on hundredths of an hour. Are they all the
hours in the system base on that or just labor hours? I just want to
make sure that we put the estimate time in the BOM is correct.

--- In vantage@yahoogroups.com, "Robert Dillon" <robert.dillon@b...>
wrote:
>
> You are converting from minutes to hundredths of an hour. Eleven
> minutes divided by the sixty minutes will give you the .18.
>
> Bob Dillon
>
>
> ________________________________
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf
> Of progress92000
> Sent: Monday, October 24, 2005 8:40 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Job Operation - Labor Hrs
>
>
> Hi Group,
>
> What the hours base on for the Labor Hrs in the Job Operation?
>
> The clock in time is 6:49AM and the clock out time is 7:00AM but
the
> Labor Hrs is .18
>
> And what about the estimated time in BOM?
>
> Thank you,
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
>
>
>
>
> Manufacturing software
t=ms&k=Manufacturing+software&w1=Manufactu
>
ring+software&w2=Membership+database+software&w3=Database+mortgage+sof
tw
>
are&w4=Pda+database+software&w5=Database+management+software&w6=Databa
se
> +marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>
> Membership database software
t=ms&k=Membership+database+software&w1=Man
>
ufacturing+software&w2=Membership+database+software&w3=Database+mortga
ge
>
+software&w4=Pda+database+software&w5=Database+management+software&w6=
Da
> tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>
> Database mortgage software
t=ms&k=Database+mortgage+software&w1=Manuf
>
acturing+software&w2=Membership+database+software&w3=Database+mortgage
+s
>
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Da
ta
> base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>

> Pda database software
t=ms&k=Pda+database+software&w1=Manufactur
>
ing+software&w2=Membership+database+software&w3=Database+mortgage+soft
wa
>
re&w4=Pda+database+software&w5=Database+management+software&w6=Databas
e+
> marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg>
Database
> management software
t=ms&k=Database+management+software&w1=Man
>
ufacturing+software&w2=Membership+database+software&w3=Database+mortga
ge
>
+software&w4=Pda+database+software&w5=Database+management+software&w6=
Da
> tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>
> Database marketing software
t=ms&k=Database+marketing+software&w1=Manu
>
facturing+software&w2=Membership+database+software&w3=Database+mortgag
e+
>
software&w4=Pda+database+software&w5=Database+management+software&w6=D
at
> abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>

>
> ________________________________
>
>
>
>
> * Visit your group "vantage
> <http://groups.yahoo.com/group/vantage> " on the web.
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
> <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/> .
>
>
> ________________________________
>
>
>
>
> [Non-text portions of this message have been removed]
>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:

Manufacturing software
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w4=Pda+database+software&w5=Database+management+software&w6=Database
+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>
Membership database software
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>
Database mortgage software
acturing+software&w2=Membership+database+software&w3=Database+mortgage+s
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Data
base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>
Pda database software
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4=Pda+database+software&w5=Database+management+software&w6=Database+
marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> Database
management software
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>
Database marketing software
facturing+software&w2=Membership+database+software&w3=Database+mortgage+
software&w4=Pda+database+software&w5=Database+management+software&w6=Dat
abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>

________________________________

<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

________________________________

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
Hi Group,

What the hours base on for the Labor Hrs in the Job Operation?

The clock in time is 6:49AM and the clock out time is 7:00AM but the
Labor Hrs is .18

And what about the estimated time in BOM?

Thank you,
You are converting from minutes to hundredths of an hour. Eleven
minutes divided by the sixty minutes will give you the .18.

Bob Dillon

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of progress92000
Sent: Monday, October 24, 2005 8:40 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Job Operation - Labor Hrs

Hi Group,

What the hours base on for the Labor Hrs in the Job Operation?

The clock in time is 6:49AM and the clock out time is 7:00AM but the
Labor Hrs is .18

And what about the estimated time in BOM?

Thank you,

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:

Manufacturing software
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w4=Pda+database+software&w5=Database+management+software&w6=Database
+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>
Membership database software
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>
Database mortgage software
acturing+software&w2=Membership+database+software&w3=Database+mortgage+s
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Data
base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>
Pda database software
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4=Pda+database+software&w5=Database+management+software&w6=Database+
marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> Database
management software
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>
Database marketing software
facturing+software&w2=Membership+database+software&w3=Database+mortgage+
software&w4=Pda+database+software&w5=Database+management+software&w6=Dat
abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>

________________________________

<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

________________________________

[Non-text portions of this message have been removed]
Thank you,

So the labor hrs is based on hundredths of an hour. Are they all the
hours in the system base on that or just labor hours? I just want to
make sure that we put the estimate time in the BOM is correct.

--- In vantage@yahoogroups.com, "Robert Dillon" <robert.dillon@b...>
wrote:
>
> You are converting from minutes to hundredths of an hour. Eleven
> minutes divided by the sixty minutes will give you the .18.
>
> Bob Dillon
>
>
> ________________________________
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf
> Of progress92000
> Sent: Monday, October 24, 2005 8:40 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Job Operation - Labor Hrs
>
>
> Hi Group,
>
> What the hours base on for the Labor Hrs in the Job Operation?
>
> The clock in time is 6:49AM and the clock out time is 7:00AM but
the
> Labor Hrs is .18
>
> And what about the estimated time in BOM?
>
> Thank you,
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
>
>
>
>
> Manufacturing software
t=ms&k=Manufacturing+software&w1=Manufactu
>
ring+software&w2=Membership+database+software&w3=Database+mortgage+sof
tw
>
are&w4=Pda+database+software&w5=Database+management+software&w6=Databa
se
> +marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>
> Membership database software
t=ms&k=Membership+database+software&w1=Man
>
ufacturing+software&w2=Membership+database+software&w3=Database+mortga
ge
>
+software&w4=Pda+database+software&w5=Database+management+software&w6=
Da
> tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>
> Database mortgage software
t=ms&k=Database+mortgage+software&w1=Manuf
>
acturing+software&w2=Membership+database+software&w3=Database+mortgage
+s
>
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Da
ta
> base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>

> Pda database software
t=ms&k=Pda+database+software&w1=Manufactur
>
ing+software&w2=Membership+database+software&w3=Database+mortgage+soft
wa
>
re&w4=Pda+database+software&w5=Database+management+software&w6=Databas
e+
> marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg>
Database
> management software
t=ms&k=Database+management+software&w1=Man
>
ufacturing+software&w2=Membership+database+software&w3=Database+mortga
ge
>
+software&w4=Pda+database+software&w5=Database+management+software&w6=
Da
> tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>
> Database marketing software
t=ms&k=Database+marketing+software&w1=Manu
>
facturing+software&w2=Membership+database+software&w3=Database+mortgag
e+
>
software&w4=Pda+database+software&w5=Database+management+software&w6=D
at
> abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>

>
> ________________________________
>
>
>
>
> * Visit your group "vantage
> <http://groups.yahoo.com/group/vantage> " on the web.
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
> <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/> .
>
>
> ________________________________
>
>
>
>
> [Non-text portions of this message have been removed]
>
As far as I know, all the hours in the system will be in hundredths.

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of progress92000
Sent: Monday, October 24, 2005 9:10 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Job Operation - Labor Hrs

Thank you,

So the labor hrs is based on hundredths of an hour. Are they all the
hours in the system base on that or just labor hours? I just want to
make sure that we put the estimate time in the BOM is correct.

--- In vantage@yahoogroups.com, "Robert Dillon" <robert.dillon@b...>
wrote:
>
> You are converting from minutes to hundredths of an hour. Eleven
> minutes divided by the sixty minutes will give you the .18.
>
> Bob Dillon
>
>
> ________________________________
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf
> Of progress92000
> Sent: Monday, October 24, 2005 8:40 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Job Operation - Labor Hrs
>
>
> Hi Group,
>
> What the hours base on for the Labor Hrs in the Job Operation?
>
> The clock in time is 6:49AM and the clock out time is 7:00AM but
the
> Labor Hrs is .18
>
> And what about the estimated time in BOM?
>
> Thank you,
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
>
>
>
>
> Manufacturing software
t=ms&k=Manufacturing+software&w1=Manufactu
>
ring+software&w2=Membership+database+software&w3=Database+mortgage+sof
tw
>
are&w4=Pda+database+software&w5=Database+management+software&w6=Databa
se
> +marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>
> Membership database software
t=ms&k=Membership+database+software&w1=Man
>
ufacturing+software&w2=Membership+database+software&w3=Database+mortga
ge
>
+software&w4=Pda+database+software&w5=Database+management+software&w6=
Da
> tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>
> Database mortgage software
t=ms&k=Database+mortgage+software&w1=Manuf
>
acturing+software&w2=Membership+database+software&w3=Database+mortgage
+s
>
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Da
ta
> base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>

> Pda database software
t=ms&k=Pda+database+software&w1=Manufactur
>
ing+software&w2=Membership+database+software&w3=Database+mortgage+soft
wa
>
re&w4=Pda+database+software&w5=Database+management+software&w6=Databas
e+
> marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg>
Database
> management software
t=ms&k=Database+management+software&w1=Man
>
ufacturing+software&w2=Membership+database+software&w3=Database+mortga
ge
>
+software&w4=Pda+database+software&w5=Database+management+software&w6=
Da
> tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>
> Database marketing software
t=ms&k=Database+marketing+software&w1=Manu
>
facturing+software&w2=Membership+database+software&w3=Database+mortgag
e+
>
software&w4=Pda+database+software&w5=Database+management+software&w6=D
at
> abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>

>
> ________________________________
>
>
>
>
> * Visit your group "vantage
> <http://groups.yahoo.com/group/vantage> " on the web.
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
> <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/> .
>
>
> ________________________________
>
>
>
>
> [Non-text portions of this message have been removed]
>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:

Manufacturing software
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w4=Pda+database+software&w5=Database+management+software&w6=Database
+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>
Membership database software
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>
Database mortgage software
acturing+software&w2=Membership+database+software&w3=Database+mortgage+s
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Data
base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>
Pda database software
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4=Pda+database+software&w5=Database+management+software&w6=Database+
marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> Database
management software
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>
Database marketing software
facturing+software&w2=Membership+database+software&w3=Database+mortgage+
software&w4=Pda+database+software&w5=Database+management+software&w6=Dat
abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>

________________________________

<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

________________________________

[Non-text portions of this message have been removed]