[off topic] Auto Export

I think some of our mail programs filter out the period at the end of the
URL, while others might not.
$.002
tj

-----Original Message-----
From: Giallombardo, Ed [mailto:egiallombardo@...]
Sent: Thursday, June 21, 2001 10:19 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] [off topic] Auto Export


The link didn't work for me either, but when I went to www.Microsoft.com
<http://www.Microsoft.com> and did a search for ScriptIt it took me to that
exact same site as the link stated but this time it worked.

-----Original Message-----
From: Gary Polvinale [mailto:garyp@...]
Sent: Thursday, June 21, 2001 8:09 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] [off topic] Auto Export


Troy,

It worked for me.

Gary Polvinale
Denton ATD
garyp@...

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, June 21, 2001 9:06 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] [off topic] Auto Export


The link seems to be dead. Search didn't turn it up. Have any other clues
on where to find ScriptIt?

Troy Funte
Liberty Electronics
----- Original Message -----
From: Michael Miles
To: vantage@yahoogroups.com
Sent: Wednesday, June 20, 2001 6:12 PM
Subject: RE: [Vantage] Auto Export


You could always give Microsoft's ScriptIt a try. It's free and available
at http://www.microsoft.com/TechNet/winnt/Winntas/tools/scriptit.asp.
<http://www.microsoft.com/TechNet/winnt/Winntas/tools/scriptit.asp.>

I find it useful for automating all sorts of things, from having compiled
Crystal reports run every week night or once per week that email XLS
attachments (I use Novell's scheduler to kick them off), or to automating
the install of software, virus updates, printers, etc.

Possibly doesn't have all the bells and whistles of Ground Control or
Macro
Scheduler, but the price is right !

Michael Miles
Continental Conveyor (AUS)
-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, 21 June 2001 6:50
To: Vantage
Subject: [Vantage] Auto Export


I had recently mentioned Ground Control for a macro utility I use for auto
exporting. I came across this email and thought I would pass it along
again
to give users another option for writing macros that can automate tasks in
Vantage (and any other software for that matter).

Troy Funte
Liberty Electronics


----- Original Message -----
From: Alan Williams
To: vantage@Yahoogroups. com
Sent: Tuesday, June 05, 2001 3:57 PM
Subject: [Vantage] Off Topic- Macro Utility


river StationeryFor anybody looking for a good macro utility, try Macro
Scheduler from these folks: www.mjtnet.com. I like it better than Ground
Control, and it's the same price (40.00 USD). It's fully functional
shareware with only a guilt screen, and has a more expensive version that
lets you incorporate VB scripts.

Thanx,
Alan



[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>



Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already
linked your email address to a yahoo id to enable access..

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>





Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=190481.1491588.3061929.2/D=egroupmail/S=1700007183:N/
A=613957/?http://www.neway.org> www.newaydirect.com

<http://us.adserver.yahoo.com/l?M=190481.1491588.3061929.2/D=egroupmail/S=17
00007183:N/A=613957/rand=170276067>

To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.




[Non-text portions of this message have been removed]


To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
The link seems to be dead. Search didn't turn it up. Have any other clues on where to find ScriptIt?

Troy Funte
Liberty Electronics
----- Original Message -----
From: Michael Miles
To: vantage@yahoogroups.com
Sent: Wednesday, June 20, 2001 6:12 PM
Subject: RE: [Vantage] Auto Export


You could always give Microsoft's ScriptIt a try. It's free and available
at http://www.microsoft.com/TechNet/winnt/Winntas/tools/scriptit.asp.

I find it useful for automating all sorts of things, from having compiled
Crystal reports run every week night or once per week that email XLS
attachments (I use Novell's scheduler to kick them off), or to automating
the install of software, virus updates, printers, etc.

Possibly doesn't have all the bells and whistles of Ground Control or Macro
Scheduler, but the price is right !

Michael Miles
Continental Conveyor (AUS)
-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, 21 June 2001 6:50
To: Vantage
Subject: [Vantage] Auto Export


I had recently mentioned Ground Control for a macro utility I use for auto
exporting. I came across this email and thought I would pass it along again
to give users another option for writing macros that can automate tasks in
Vantage (and any other software for that matter).

Troy Funte
Liberty Electronics


----- Original Message -----
From: Alan Williams
To: vantage@Yahoogroups. com
Sent: Tuesday, June 05, 2001 3:57 PM
Subject: [Vantage] Off Topic- Macro Utility


river StationeryFor anybody looking for a good macro utility, try Macro
Scheduler from these folks: www.mjtnet.com. I like it better than Ground
Control, and it's the same price (40.00 USD). It's fully functional
shareware with only a guilt screen, and has a more expensive version that
lets you incorporate VB scripts.

Thanx,
Alan



[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please go to: http://groups.yahoo.com/group/vantage/files/. Note: You must have already linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
Troy,

It worked for me.

Gary Polvinale
Denton ATD
garyp@...

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, June 21, 2001 9:06 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] [off topic] Auto Export


The link seems to be dead. Search didn't turn it up. Have any other clues
on where to find ScriptIt?

Troy Funte
Liberty Electronics
----- Original Message -----
From: Michael Miles
To: vantage@yahoogroups.com
Sent: Wednesday, June 20, 2001 6:12 PM
Subject: RE: [Vantage] Auto Export


You could always give Microsoft's ScriptIt a try. It's free and available
at http://www.microsoft.com/TechNet/winnt/Winntas/tools/scriptit.asp.

I find it useful for automating all sorts of things, from having compiled
Crystal reports run every week night or once per week that email XLS
attachments (I use Novell's scheduler to kick them off), or to automating
the install of software, virus updates, printers, etc.

Possibly doesn't have all the bells and whistles of Ground Control or
Macro
Scheduler, but the price is right !

Michael Miles
Continental Conveyor (AUS)
-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, 21 June 2001 6:50
To: Vantage
Subject: [Vantage] Auto Export


I had recently mentioned Ground Control for a macro utility I use for auto
exporting. I came across this email and thought I would pass it along
again
to give users another option for writing macros that can automate tasks in
Vantage (and any other software for that matter).

Troy Funte
Liberty Electronics


----- Original Message -----
From: Alan Williams
To: vantage@Yahoogroups. com
Sent: Tuesday, June 05, 2001 3:57 PM
Subject: [Vantage] Off Topic- Macro Utility


river StationeryFor anybody looking for a good macro utility, try Macro
Scheduler from these folks: www.mjtnet.com. I like it better than Ground
Control, and it's the same price (40.00 USD). It's fully functional
shareware with only a guilt screen, and has a more expensive version that
lets you incorporate VB scripts.

Thanx,
Alan



[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have
already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have
already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access..

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Ah, the period at the end was goofing up the link. Deleting the period allowed it to work. Thanks.
----- Original Message -----
From: Gary Polvinale
To: vantage@yahoogroups.com
Sent: Thursday, June 21, 2001 9:09 AM
Subject: RE: [Vantage] [off topic] Auto Export


Troy,

It worked for me.

Gary Polvinale
Denton ATD
garyp@...

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, June 21, 2001 9:06 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] [off topic] Auto Export


The link seems to be dead. Search didn't turn it up. Have any other clues
on where to find ScriptIt?

Troy Funte
Liberty Electronics
----- Original Message -----
From: Michael Miles
To: vantage@yahoogroups.com
Sent: Wednesday, June 20, 2001 6:12 PM
Subject: RE: [Vantage] Auto Export


You could always give Microsoft's ScriptIt a try. It's free and available
at http://www.microsoft.com/TechNet/winnt/Winntas/tools/scriptit.asp.

I find it useful for automating all sorts of things, from having compiled
Crystal reports run every week night or once per week that email XLS
attachments (I use Novell's scheduler to kick them off), or to automating
the install of software, virus updates, printers, etc.

Possibly doesn't have all the bells and whistles of Ground Control or
Macro
Scheduler, but the price is right !

Michael Miles
Continental Conveyor (AUS)
-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, 21 June 2001 6:50
To: Vantage
Subject: [Vantage] Auto Export


I had recently mentioned Ground Control for a macro utility I use for auto
exporting. I came across this email and thought I would pass it along
again
to give users another option for writing macros that can automate tasks in
Vantage (and any other software for that matter).

Troy Funte
Liberty Electronics


----- Original Message -----
From: Alan Williams
To: vantage@Yahoogroups. com
Sent: Tuesday, June 05, 2001 3:57 PM
Subject: [Vantage] Off Topic- Macro Utility


river StationeryFor anybody looking for a good macro utility, try Macro
Scheduler from these folks: www.mjtnet.com. I like it better than Ground
Control, and it's the same price (40.00 USD). It's fully functional
shareware with only a guilt screen, and has a more expensive version that
lets you incorporate VB scripts.

Thanx,
Alan



[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have
already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have
already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access..

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please go to: http://groups.yahoo.com/group/vantage/files/. Note: You must have already linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
The link didn't work for me either, but when I went to www.Microsoft.com
<http://www.Microsoft.com> and did a search for ScriptIt it took me to that
exact same site as the link stated but this time it worked.

-----Original Message-----
From: Gary Polvinale [mailto:garyp@...]
Sent: Thursday, June 21, 2001 8:09 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] [off topic] Auto Export


Troy,

It worked for me.

Gary Polvinale
Denton ATD
garyp@...

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, June 21, 2001 9:06 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] [off topic] Auto Export


The link seems to be dead. Search didn't turn it up. Have any other clues
on where to find ScriptIt?

Troy Funte
Liberty Electronics
----- Original Message -----
From: Michael Miles
To: vantage@yahoogroups.com
Sent: Wednesday, June 20, 2001 6:12 PM
Subject: RE: [Vantage] Auto Export


You could always give Microsoft's ScriptIt a try. It's free and available
at http://www.microsoft.com/TechNet/winnt/Winntas/tools/scriptit.asp.
<http://www.microsoft.com/TechNet/winnt/Winntas/tools/scriptit.asp.>

I find it useful for automating all sorts of things, from having compiled
Crystal reports run every week night or once per week that email XLS
attachments (I use Novell's scheduler to kick them off), or to automating
the install of software, virus updates, printers, etc.

Possibly doesn't have all the bells and whistles of Ground Control or
Macro
Scheduler, but the price is right !

Michael Miles
Continental Conveyor (AUS)
-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, 21 June 2001 6:50
To: Vantage
Subject: [Vantage] Auto Export


I had recently mentioned Ground Control for a macro utility I use for auto
exporting. I came across this email and thought I would pass it along
again
to give users another option for writing macros that can automate tasks in
Vantage (and any other software for that matter).

Troy Funte
Liberty Electronics


----- Original Message -----
From: Alan Williams
To: vantage@Yahoogroups. com
Sent: Tuesday, June 05, 2001 3:57 PM
Subject: [Vantage] Off Topic- Macro Utility


river StationeryFor anybody looking for a good macro utility, try Macro
Scheduler from these folks: www.mjtnet.com. I like it better than Ground
Control, and it's the same price (40.00 USD). It's fully functional
shareware with only a guilt screen, and has a more expensive version that
lets you incorporate VB scripts.

Thanx,
Alan



[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>



Yahoo! Groups Sponsor



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already
linked your email address to a yahoo id to enable access..

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>





Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=190481.1491588.3061929.2/D=egroupmail/S=1700007183:N/
A=613957/?http://www.neway.org> www.newaydirect.com

<http://us.adserver.yahoo.com/l?M=190481.1491588.3061929.2/D=egroupmail/S=17
00007183:N/A=613957/rand=170276067>

To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.




[Non-text portions of this message have been removed]