V9 MES Blank Title 99822

The MES users can only see the screens if the MES session uses my user name not the generic ones we created. I gave the generic ones full security access and they still do not work.


From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Chris Thompson
Sent: Friday, April 15, 2011 3:18 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] V9 MES



If a you clock into normal Epicor as one of the generic MES logins, are you able
to view the screens in question?

In Shop Employee Maintence you need to have things like 'Production Worker',
'Request Material', 'Report Quantity', 'Report Scrap Quantity' ticked. These are
the ones we have ticked for 95% of shopfloor employees. Supervisors get extra
ticks.



________________________________
From: Keith Mailloux <keith.mailloux@...<mailto:keith.mailloux%40fergusonperf.com>>
To: "vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>" <vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>>
Sent: Thu, 14 April, 2011 17:16:26
Subject: RE: [Vantage] V9 MES


Thanks, I understand the employee settings, after hunting around initially, but
the buttons are active (the ones I expect to) when I am the MES login user. When
I use the Data collection user name they do not work. Under both conditions I
try to clock in using the same employee number. Once again, with my login it
works, data collection login it does not. I cannot find any security settings
that are different for the login names.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
Chris Robisch
Sent: Thursday, April 14, 2011 12:02 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: Re: [Vantage] V9 MES

Many of those buttons are controlled by flags in Shop Employee maintenance.
And some of them require the Advanced Material Management module.

----- Original Message -----
From: "Keith Mailloux"
<keith.mailloux@...<mailto:keith.mailloux%40fergusonperf.com><mailto:keith.mailloux%40fergusonperf.com>>
To: <vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>>
Sent: Thursday, April 14, 2011 8:49 AM
Subject: [Vantage] V9 MES

> We have data collection stations deployed throughout the facility. We
> established a unique Epicor user name for each station, all with the same
> permissions/security. When I launch MES and login using the expected data
> collection station name, any employee that clocks in cannot access buttons
> such as job tracker and part tracker. Now if I launch MES and use my
> login, any employee that clocks in CAN access the respective buttons.
>
> I thought it would be a simple group or security issue. I gave a test data
> collection station manager privileges and still no one can access the
> buttons. Any one aware of some hidden security switches or check boxes I
> may have missed. The employees can access what they need but only if I
> login the MES application.
>
> Thanks,
>
> Keith Mailloux
> Ferguson Perforating
> (401)941-8876
>
>
> ---------------------------------
> This e-mail and any attachments may contain confidential and
> privileged information. If you are not the intended recipient,
> please notify the sender immediately by return e-mail, delete this
> e-mail and destroy any copies. Any dissemination or use of this
> information by a person other than the intended recipient is
> unauthorized and may be illegal.
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
>http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/group/vantage/files/>
>>
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com<http://www.avg.com>
> Version: 10.0.1209 / Virus Database: 1500/3573 - Release Date: 04/14/11
>

---------------------------------
This e-mail and any attachments may contain confidential and
privileged information. If you are not the intended recipient,
please notify the sender immediately by return e-mail, delete this
e-mail and destroy any copies. Any dissemination or use of this
information by a person other than the intended recipient is
unauthorized and may be illegal.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

---------------------------------
This e-mail and any attachments may contain confidential and
privileged information. If you are not the intended recipient,
please notify the sender immediately by return e-mail, delete this
e-mail and destroy any copies. Any dissemination or use of this
information by a person other than the intended recipient is
unauthorized and may be illegal.


[Non-text portions of this message have been removed]
We have data collection stations deployed throughout the facility. We established a unique Epicor user name for each station, all with the same permissions/security. When I launch MES and login using the expected data collection station name, any employee that clocks in cannot access buttons such as job tracker and part tracker. Now if I launch MES and use my login, any employee that clocks in CAN access the respective buttons.

I thought it would be a simple group or security issue. I gave a test data collection station manager privileges and still no one can access the buttons. Any one aware of some hidden security switches or check boxes I may have missed. The employees can access what they need but only if I login the MES application.

Thanks,

Keith Mailloux
Ferguson Perforating
(401)941-8876


---------------------------------
This e-mail and any attachments may contain confidential and
privileged information. If you are not the intended recipient,
please notify the sender immediately by return e-mail, delete this
e-mail and destroy any copies. Any dissemination or use of this
information by a person other than the intended recipient is
unauthorized and may be illegal.

[Non-text portions of this message have been removed]
Many of those buttons are controlled by flags in Shop Employee maintenance.
And some of them require the Advanced Material Management module.

----- Original Message -----
From: "Keith Mailloux" <keith.mailloux@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, April 14, 2011 8:49 AM
Subject: [Vantage] V9 MES


> We have data collection stations deployed throughout the facility. We
> established a unique Epicor user name for each station, all with the same
> permissions/security. When I launch MES and login using the expected data
> collection station name, any employee that clocks in cannot access buttons
> such as job tracker and part tracker. Now if I launch MES and use my
> login, any employee that clocks in CAN access the respective buttons.
>
> I thought it would be a simple group or security issue. I gave a test data
> collection station manager privileges and still no one can access the
> buttons. Any one aware of some hidden security switches or check boxes I
> may have missed. The employees can access what they need but only if I
> login the MES application.
>
> Thanks,
>
> Keith Mailloux
> Ferguson Perforating
> (401)941-8876
>
>
> ---------------------------------
> This e-mail and any attachments may contain confidential and
> privileged information. If you are not the intended recipient,
> please notify the sender immediately by return e-mail, delete this
> e-mail and destroy any copies. Any dissemination or use of this
> information by a person other than the intended recipient is
> unauthorized and may be illegal.
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1209 / Virus Database: 1500/3573 - Release Date: 04/14/11
>
Thanks, I understand the employee settings, after hunting around initially, but the buttons are active (the ones I expect to) when I am the MES login user. When I use the Data collection user name they do not work. Under both conditions I try to clock in using the same employee number. Once again, with my login it works, data collection login it does not. I cannot find any security settings that are different for the login names.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Chris Robisch
Sent: Thursday, April 14, 2011 12:02 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] V9 MES



Many of those buttons are controlled by flags in Shop Employee maintenance.
And some of them require the Advanced Material Management module.

----- Original Message -----
From: "Keith Mailloux" <keith.mailloux@...<mailto:keith.mailloux%40fergusonperf.com>>
To: <vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>>
Sent: Thursday, April 14, 2011 8:49 AM
Subject: [Vantage] V9 MES

> We have data collection stations deployed throughout the facility. We
> established a unique Epicor user name for each station, all with the same
> permissions/security. When I launch MES and login using the expected data
> collection station name, any employee that clocks in cannot access buttons
> such as job tracker and part tracker. Now if I launch MES and use my
> login, any employee that clocks in CAN access the respective buttons.
>
> I thought it would be a simple group or security issue. I gave a test data
> collection station manager privileges and still no one can access the
> buttons. Any one aware of some hidden security switches or check boxes I
> may have missed. The employees can access what they need but only if I
> login the MES application.
>
> Thanks,
>
> Keith Mailloux
> Ferguson Perforating
> (401)941-8876
>
>
> ---------------------------------
> This e-mail and any attachments may contain confidential and
> privileged information. If you are not the intended recipient,
> please notify the sender immediately by return e-mail, delete this
> e-mail and destroy any copies. Any dissemination or use of this
> information by a person other than the intended recipient is
> unauthorized and may be illegal.
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/>
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com<http://www.avg.com>
> Version: 10.0.1209 / Virus Database: 1500/3573 - Release Date: 04/14/11
>



---------------------------------
This e-mail and any attachments may contain confidential and
privileged information. If you are not the intended recipient,
please notify the sender immediately by return e-mail, delete this
e-mail and destroy any copies. Any dissemination or use of this
information by a person other than the intended recipient is
unauthorized and may be illegal.

[Non-text portions of this message have been removed]
If a you clock into normal Epicor as one of the generic MES logins, are you able
to view the screens in question?

In Shop Employee Maintence you need to have things like 'Production Worker',
'Request Material', 'Report Quantity', 'Report Scrap Quantity' ticked. These are
the ones we have ticked for 95% of shopfloor employees. Supervisors get extra
ticks.


Â



________________________________
From: Keith Mailloux <keith.mailloux@...>
To: "vantage@yahoogroups.com" <vantage@yahoogroups.com>
Sent: Thu, 14 April, 2011 17:16:26
Subject: RE: [Vantage] V9 MES

Â
Thanks, I understand the employee settings, after hunting around initially, but
the buttons are active (the ones I expect to) when I am the MES login user. When
I use the Data collection user name they do not work. Under both conditions I
try to clock in using the same employee number. Once again, with my login it
works, data collection login it does not. I cannot find any security settings
that are different for the login names.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Chris Robisch
Sent: Thursday, April 14, 2011 12:02 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] V9 MES

Many of those buttons are controlled by flags in Shop Employee maintenance.
And some of them require the Advanced Material Management module.

----- Original Message -----
From: "Keith Mailloux"
<keith.mailloux@...<mailto:keith.mailloux%40fergusonperf.com>>
To: <vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>>
Sent: Thursday, April 14, 2011 8:49 AM
Subject: [Vantage] V9 MES

> We have data collection stations deployed throughout the facility. We
> established a unique Epicor user name for each station, all with the same
> permissions/security. When I launch MES and login using the expected data
> collection station name, any employee that clocks in cannot access buttons
> such as job tracker and part tracker. Now if I launch MES and use my
> login, any employee that clocks in CAN access the respective buttons.
>
> I thought it would be a simple group or security issue. I gave a test data
> collection station manager privileges and still no one can access the
> buttons. Any one aware of some hidden security switches or check boxes I
> may have missed. The employees can access what they need but only if I
> login the MES application.
>
> Thanks,
>
> Keith Mailloux
> Ferguson Perforating
> (401)941-8876
>
>
> ---------------------------------
> This e-mail and any attachments may contain confidential and
> privileged information. If you are not the intended recipient,
> please notify the sender immediately by return e-mail, delete this
> e-mail and destroy any copies. Any dissemination or use of this
> information by a person other than the intended recipient is
> unauthorized and may be illegal.
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
>http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/>
>>
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com<http://www.avg.com>
> Version: 10.0.1209 / Virus Database: 1500/3573 - Release Date: 04/14/11
>

---------------------------------
This e-mail and any attachments may contain confidential and
privileged information. If you are not the intended recipient,
please notify the sender immediately by return e-mail, delete this
e-mail and destroy any copies. Any dissemination or use of this
information by a person other than the intended recipient is
unauthorized and may be illegal.

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]