Vantage 6.1 - material marked for backflush - is not updating on

Yahoo Archive
1
Well we do both (backflush material and labor) and this has worked
without issue for us, but you could be right because we account for
material and labor only when we ship the parts out the door. So I am
not sure how it would work with your scenario...sorry...







M. Manasa Reddy

manasa@... <mailto:manasa@...>

800.852.2325

630.806.2000 ofc

630.806.2001 fax

www.weldcoa.com

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of richter_clements
Sent: Thursday, March 04, 2010 1:25 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: vantage 6.1 - material marked for backflush - is
not updating on





I believe that is 1 method - if you wanted all material on job to be
issued complete....

However, if you issue so many at a time - maybe job is running over
days/weeks, and you want material issued as used....you can set the
backflush flag in the part master part record (of the material) which
sets the flag by default in the job....Then it's supposed to backflush
the material as labor is reported against the related operation....

I'm wondering if I need an Advance Material Module or something to make
this work.....

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ,
"Manasa Reddy" <manasa@...> wrote:
>
> I am coming in late with this, so sorry if it was already posted...
>
>
>
> When do you close / complete your jobs? In the process of job closing
> there is a backflush check box. When that is checked is when
everything
> backflushes (at least in version 8). IS that available in 6.1?
>
>
>
>
>
>
>
> M. Manasa Reddy
>
> manasa@... <mailto:manasa@...>
>
> 800.852.2325
>
> 630.806.2000 ofc
>
> 630.806.2001 fax
>
> www.weldcoa.com
>
> ________________________________
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
> Of richter_clements
> Sent: Thursday, March 04, 2010 8:01 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Re: vantage 6.1 - material marked for backflush -
is
> not updating on
>
>
>
>
>
> Is it possible this is not updated 'on the fly' - and a process is run
> at some point updating backflush material?
>
> Material is related to the operation - the same operation where labor
is
> reported...I set the flag - operator entered labor - I checked the
> transaction history for the part - no history of stock to material and
> on hand quantity remained....
>
> 3 days later - checked again - I see the labor entry reported 2 days
> later DID post a transaction of stock to material! Why wouldn't it
have
> picked up the previous day (or two) when I set the flag? Maybe because
> the labor when entered (just after I set the flag) was entered for the
> previous day's work with the previous day's date (before I set the
> flag)? I need to know if I can comfortably rely on this.
>
> --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> , Lori
> Worshek <loriworshek@> wrote:
> >
> > Do you have the material related to an operation? It needs to be
> related to the operation where you want it backflushed from in order
for
> it to work.
> >
> > Lori Worshek
> > Business Systems Analyst
> > TEAM Industries
> > 105 Park Ave NW, Bagley, MN 56621
> > Direct line: 218-694-4127
> > Cell: 218-556-4149
> > Fax: 218-694-3552
> >
> > A culture of accountability makes a good organization great and a
> great organization unstoppable.
> > ~Henry J. Evans
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]
2
Do you have the material related to an operation? It needs to be related to the operation where you want it backflushed from in order for it to work.

Lori Worshek
Business Systems Analyst
TEAM Industries
105 Park Ave NW, Bagley, MN 56621
Direct line: 218-694-4127
Cell: 218-556-4149
Fax: 218-694-3552

A culture of accountability makes a good organization great and a great organization unstoppable.
~Henry J. Evans



[Non-text portions of this message have been removed]
3
Is it possible this is not updated 'on the fly' - and a process is run at some point updating backflush material?

Material is related to the operation - the same operation where labor is reported...I set the flag - operator entered labor - I checked the transaction history for the part - no history of stock to material and on hand quantity remained....

3 days later - checked again - I see the labor entry reported 2 days later DID post a transaction of stock to material! Why wouldn't it have picked up the previous day (or two) when I set the flag? Maybe because the labor when entered (just after I set the flag) was entered for the previous day's work with the previous day's date (before I set the flag)? I need to know if I can comfortably rely on this.

--- In vantage@yahoogroups.com, Lori Worshek <loriworshek@...> wrote:
>
> Do you have the material related to an operation? It needs to be related to the operation where you want it backflushed from in order for it to work.
>
> Lori Worshek
> Business Systems Analyst
> TEAM Industries
> 105 Park Ave NW, Bagley, MN 56621
> Direct line: 218-694-4127
> Cell: 218-556-4149
> Fax: 218-694-3552
>
> A culture of accountability makes a good organization great and a great organization unstoppable.
> ~Henry J. Evans
>
>
>
> [Non-text portions of this message have been removed]
>
4
I am coming in late with this, so sorry if it was already posted...



When do you close / complete your jobs? In the process of job closing
there is a backflush check box. When that is checked is when everything
backflushes (at least in version 8). IS that available in 6.1?







M. Manasa Reddy

manasa@... <mailto:manasa@...>

800.852.2325

630.806.2000 ofc

630.806.2001 fax

www.weldcoa.com

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of richter_clements
Sent: Thursday, March 04, 2010 8:01 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: vantage 6.1 - material marked for backflush - is
not updating on





Is it possible this is not updated 'on the fly' - and a process is run
at some point updating backflush material?

Material is related to the operation - the same operation where labor is
reported...I set the flag - operator entered labor - I checked the
transaction history for the part - no history of stock to material and
on hand quantity remained....

3 days later - checked again - I see the labor entry reported 2 days
later DID post a transaction of stock to material! Why wouldn't it have
picked up the previous day (or two) when I set the flag? Maybe because
the labor when entered (just after I set the flag) was entered for the
previous day's work with the previous day's date (before I set the
flag)? I need to know if I can comfortably rely on this.

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , Lori
Worshek <loriworshek@...> wrote:
>
> Do you have the material related to an operation? It needs to be
related to the operation where you want it backflushed from in order for
it to work.
>
> Lori Worshek
> Business Systems Analyst
> TEAM Industries
> 105 Park Ave NW, Bagley, MN 56621
> Direct line: 218-694-4127
> Cell: 218-556-4149
> Fax: 218-694-3552
>
> A culture of accountability makes a good organization great and a
great organization unstoppable.
> ~Henry J. Evans
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]
5
I believe that is 1 method - if you wanted all material on job to be issued complete....

However, if you issue so many at a time - maybe job is running over days/weeks, and you want material issued as used....you can set the backflush flag in the part master part record (of the material) which sets the flag by default in the job....Then it's supposed to backflush the material as labor is reported against the related operation....

I'm wondering if I need an Advance Material Module or something to make this work.....


--- In vantage@yahoogroups.com, "Manasa Reddy" <manasa@...> wrote:
>
> I am coming in late with this, so sorry if it was already posted...
>
>
>
> When do you close / complete your jobs? In the process of job closing
> there is a backflush check box. When that is checked is when everything
> backflushes (at least in version 8). IS that available in 6.1?
>
>
>
>
>
>
>
> M. Manasa Reddy
>
> manasa@... <mailto:manasa@...>
>
> 800.852.2325
>
> 630.806.2000 ofc
>
> 630.806.2001 fax
>
> www.weldcoa.com
>
> ________________________________
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of richter_clements
> Sent: Thursday, March 04, 2010 8:01 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Re: vantage 6.1 - material marked for backflush - is
> not updating on
>
>
>
>
>
> Is it possible this is not updated 'on the fly' - and a process is run
> at some point updating backflush material?
>
> Material is related to the operation - the same operation where labor is
> reported...I set the flag - operator entered labor - I checked the
> transaction history for the part - no history of stock to material and
> on hand quantity remained....
>
> 3 days later - checked again - I see the labor entry reported 2 days
> later DID post a transaction of stock to material! Why wouldn't it have
> picked up the previous day (or two) when I set the flag? Maybe because
> the labor when entered (just after I set the flag) was entered for the
> previous day's work with the previous day's date (before I set the
> flag)? I need to know if I can comfortably rely on this.
>
> --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , Lori
> Worshek <loriworshek@> wrote:
> >
> > Do you have the material related to an operation? It needs to be
> related to the operation where you want it backflushed from in order for
> it to work.
> >
> > Lori Worshek
> > Business Systems Analyst
> > TEAM Industries
> > 105 Park Ave NW, Bagley, MN 56621
> > Direct line: 218-694-4127
> > Cell: 218-556-4149
> > Fax: 218-694-3552
> >
> > A culture of accountability makes a good organization great and a
> great organization unstoppable.
> > ~Henry J. Evans
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
6
Although the Labor Entry action is what will cause it to backflush,
there are a number of other triggers that pass this through to cause the
material to be issued. These include simply looking at the job via Job
Tracker or Production Detail Report, for this job.

Ie step 1 Labor Entry > step 2 trigger it somehow (eg view in Job
Tracker)



cheers

Kevin Kennedy
COGITA(r)

Mobile +61 404 827 014



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of richter_clements
Sent: Friday, 5 March 2010 1:01 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: vantage 6.1 - material marked for backflush - is
not updating on





Is it possible this is not updated 'on the fly' - and a process is run
at some point updating backflush material?

Material is related to the operation - the same operation where labor is
reported...I set the flag - operator entered labor - I checked the
transaction history for the part - no history of stock to material and
on hand quantity remained....

3 days later - checked again - I see the labor entry reported 2 days
later DID post a transaction of stock to material! Why wouldn't it have
picked up the previous day (or two) when I set the flag? Maybe because
the labor when entered (just after I set the flag) was entered for the
previous day's work with the previous day's date (before I set the
flag)? I need to know if I can comfortably rely on this.

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , Lori
Worshek <loriworshek@...> wrote:
>
> Do you have the material related to an operation? It needs to be
related to the operation where you want it backflushed from in order for
it to work.
>
> Lori Worshek
> Business Systems Analyst
> TEAM Industries
> 105 Park Ave NW, Bagley, MN 56621
> Direct line: 218-694-4127
> Cell: 218-556-4149
> Fax: 218-694-3552
>
> A culture of accountability makes a good organization great and a
great organization unstoppable.
> ~Henry J. Evans
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]