Vantage client locking up

Yahoo Archive
1
I had two identical machines. DELL Optiplex GX300 running Windows 2000.
One would run Vantage like a champ... no problems. The other would lockup
and took forever to load Vantage. The only difference was the fast one had
SP2 and the slow one had SP4. I did a reload of the SP4 machine and loaded
it with SP2. I still had the same problems??? I finally decided to disable
the onboard Network and installed a new Network card in the machine having
problems. That did the trick.

FYI
Paul L.

-----Original Message-----
From: Dan Tisone [mailto:dtisone@...]
Sent: Tuesday, October 28, 2003 4:39 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage client locking up


Funny you should mention this. I have an old W2K machine with SP4
(clean install) that is also having lockups....all my other W2K SP4
machines are fine. This particular machine is handling the Data
Collection and was supposed to replace my W98 Data Collection terminal.
I did a RAM check and found nothing, I also replaced the hard drive and
was still having problems so I switched back to the W98 machine due to
all the lockups. I still need to look at this machine in detail.

Daniel M Tisone
Director of Operations and Information Services
dan.tisone@...
(949) 440-3685 x148





-----Original Message-----
From: Ordway, Bruce [mailto:bruceo@...]
Sent: Tuesday, October 28, 2003 11:24 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage client locking up


We are still working with the Vantage 6.0 training account.

I've had the client lock up a few times over the past week.

I'm running Windows 2K SP4.



Just wondering what others experience is with clients locking up.



Thanks,

Bruce



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/>




Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=194081.4074964.5287182.1261774/D=egroupweb/S=17050071
83:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code=3050
9&media=atkins> click here

<http://us.adserver.yahoo.com/l?M=194081.4074964.5287182.1261774/D=egroupmai
l/S=:HM/A=1732161/rand=797727025>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
2
Funny you should mention this. I have an old W2K machine with SP4
(clean install) that is also having lockups....all my other W2K SP4
machines are fine. This particular machine is handling the Data
Collection and was supposed to replace my W98 Data Collection terminal.
I did a RAM check and found nothing, I also replaced the hard drive and
was still having problems so I switched back to the W98 machine due to
all the lockups. I still need to look at this machine in detail.

Daniel M Tisone
Director of Operations and Information Services
dan.tisone@...
(949) 440-3685 x148





-----Original Message-----
From: Ordway, Bruce [mailto:bruceo@...]
Sent: Tuesday, October 28, 2003 11:24 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage client locking up


We are still working with the Vantage 6.0 training account.

I've had the client lock up a few times over the past week.

I'm running Windows 2K SP4.



Just wondering what others experience is with clients locking up.



Thanks,

Bruce



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/