Whether to go live in version 5

Yahoo Archive
1
Kevin Kadamus wrote:
>
> Since you are new to Vantage I would suggest that you start with version
> 5.0. There are enough enhancements that outweigh any of the minor "bugs"
> that you might encounter. We have several clients that we have upgraded and
> they are very pleased with how version 5.0 is working with very little
> problems. We have done several version 3.0 to 4.0 to 5.0 all in two days
> time and they are working fine. Keep watch on the Vantage web site for
> patches and you should be ok. Most of the so-called "major bugs" are
> usually due to very specific requirements or custom setups that most Vantage
> users won't have to worry about.

Care to elaborate on that last sentence? We don't have any custom
setups or specific requirements and we're suffering greatly.


> Please understand that it is not "Bug free", but with 18 plus years of IT
> and ERP systems experience, I do believe it is important to stay with
> current revisions.
> It will benefit your company in the long run. Give me a call if you have
> any other concerns.
>
> Thanks,
>
> Kevin Kadamus
> Intelligent Systems Integration, Inc.
> 58 Wolf Den Lane
> Wheelock, VT 05851
> 802-626-9219 (Phone and Fax)
> 330-283-0725 (Cell)
> "Helping business make intelligent use of technology"
2
We are new to emanufacturing. We started testing with 4.0 and decided
to move to 5.o due to some enhancements. I would like to know
whether we as a company would be better to begin with 4.0 and go live
and then upgrade to 5.0 after all these bugs are fixed? I am also
wondering if there is a list that would tell me the differences
between version 4 and version 5. Any help would be immensely
appreciated. Thanks.
3
There was a document in the file download area called "What's New in 5.0". I don't see it now, so someone must have removed it. I'm not sure if I should be distributing it, but I can email it to you directly if you like.

*Remove "nospam-" to email me.

John Mueske
Hiatt Manufacturing, Inc.
hiattmfg@...


----- Original Message -----
From: lheisey@...
To: vantage@yahoogroups.com
Sent: Tuesday, March 20, 2001 2:55 PM
Subject: [Vantage] Whether to go live in version 5


We are new to emanufacturing. We started testing with 4.0 and decided
to move to 5.o due to some enhancements. I would like to know
whether we as a company would be better to begin with 4.0 and go live
and then upgrade to 5.0 after all these bugs are fixed? I am also
wondering if there is a list that would tell me the differences
between version 4 and version 5. Any help would be immensely
appreciated. Thanks.


[Non-text portions of this message have been removed]
4
it was mailed to me previously today... any suggestions on upgrading?

-----Original Message-----
From: Hiatt Manufacturing, Inc. [mailto:hiattmfg@...]
Sent: Tuesday, March 20, 2001 4:27 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Whether to go live in version 5


There was a document in the file download area called "What's New in 5.0". I
don't see it now, so someone must have removed it. I'm not sure if I should
be distributing it, but I can email it to you directly if you like.

*Remove "nospam-" to email me.

John Mueske
Hiatt Manufacturing, Inc.
hiattmfg@...


----- Original Message -----
From: lheisey@...
To: vantage@yahoogroups.com
Sent: Tuesday, March 20, 2001 2:55 PM
Subject: [Vantage] Whether to go live in version 5


We are new to emanufacturing. We started testing with 4.0 and decided
to move to 5.o due to some enhancements. I would like to know
whether we as a company would be better to begin with 4.0 and go live
and then upgrade to 5.0 after all these bugs are fixed? I am also
wondering if there is a list that would tell me the differences
between version 4 and version 5. Any help would be immensely
appreciated. Thanks.


[Non-text portions of this message have been removed]



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
5
Make sure you don't have expired codes. It can really mess up your weekend
project.

-----Original Message-----
From: Heisey, Lois [mailto:lheisey@...]
Sent: Tuesday, March 20, 2001 6:43 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Whether to go live in version 5


it was mailed to me previously today... any suggestions on upgrading?

-----Original Message-----
From: Hiatt Manufacturing, Inc. [mailto:hiattmfg@...]
Sent: Tuesday, March 20, 2001 4:27 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Whether to go live in version 5


There was a document in the file download area called "What's New in 5.0". I
don't see it now, so someone must have removed it. I'm not sure if I should
be distributing it, but I can email it to you directly if you like.

*Remove "nospam-" to email me.

John Mueske
Hiatt Manufacturing, Inc.
hiattmfg@...


----- Original Message -----
From: lheisey@...
To: vantage@yahoogroups.com
Sent: Tuesday, March 20, 2001 2:55 PM
Subject: [Vantage] Whether to go live in version 5


We are new to emanufacturing. We started testing with 4.0 and decided
to move to 5.o due to some enhancements. I would like to know
whether we as a company would be better to begin with 4.0 and go live
and then upgrade to 5.0 after all these bugs are fixed? I am also
wondering if there is a list that would tell me the differences
between version 4 and version 5. Any help would be immensely
appreciated. Thanks.


[Non-text portions of this message have been removed]



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
6
Since you are new to Vantage I would suggest that you start with version
5.0. There are enough enhancements that outweigh any of the minor "bugs"
that you might encounter. We have several clients that we have upgraded and
they are very pleased with how version 5.0 is working with very little
problems. We have done several version 3.0 to 4.0 to 5.0 all in two days
time and they are working fine. Keep watch on the Vantage web site for
patches and you should be ok. Most of the so-called "major bugs" are
usually due to very specific requirements or custom setups that most Vantage
users won't have to worry about.
Please understand that it is not "Bug free", but with 18 plus years of IT
and ERP systems experience, I do believe it is important to stay with
current revisions.
It will benefit your company in the long run. Give me a call if you have
any other concerns.

Thanks,

Kevin Kadamus
Intelligent Systems Integration, Inc.
58 Wolf Den Lane
Wheelock, VT 05851
802-626-9219 (Phone and Fax)
330-283-0725 (Cell)
"Helping business make intelligent use of technology"

-----Original Message-----
From: lheisey@... [mailto:lheisey@...]
Sent: Tuesday, March 20, 2001 3:55 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Whether to go live in version 5


We are new to emanufacturing. We started testing with 4.0 and decided
to move to 5.o due to some enhancements. I would like to know
whether we as a company would be better to begin with 4.0 and go live
and then upgrade to 5.0 after all these bugs are fixed? I am also
wondering if there is a list that would tell me the differences
between version 4 and version 5. Any help would be immensely
appreciated. Thanks.



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=162801.1342103.2934627/D=egroupmail/S=1700007183:N/A=
599089/*http://www.knowledgestorm.com/jump_white.html?c=Yahoo&n=eLert_Comput
ersInternet_Software_WhiteGridOptions&t=ad> Click Here to Find Software
Faster
Click Here to Find Software Faster

<http://us.adserver.yahoo.com/l?M=162801.1342103.2934627/D=egroupmail/S=1700
007183:N/A=599089/rand=739217834>

To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> Note: You must have
already linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.