Server out of memory when print previewing custom crystal report

Yahoo Archive
1
The file is 1.622MB in size.



That’s very strange… I just looked at the typical size of the reports & 95% of them are between 1.622MB & 1.70MB.



Any thoughts???



Thanks!



Ron Flynn



Cubic Designs, Inc.

CUSTOM MEZZANINE SYSTEMS

www.cubicdesigns.com

262.789.1966

262.789.1970 fax







From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Chris Thompson
Sent: Thursday, January 14, 2010 10:12 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Server out of memory when print previewing custom crystal reports?





How big is the .rpt file that you are trying to print?



________________________________
From: IT Support <itsupport@... <mailto:itsupport%40cubicdesigns.com> >
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Sent: Thu, 14 January, 2010 14:58:19
Subject: FW: [Vantage] Server out of memory when print previewing custom crystal reports?


Any idea of that parameter?

We only experience this on a few workstations, (these are AutoCAD systems with at least 3GB of memory)

Also we only get errors in the workstation event log, not on the app server.

Thanks!

Ron Flynn

Cubic Designs, Inc.

CUSTOM MEZZANINE SYSTEMS

www.cubicdesigns. com

262.789.1966

262.789.1970 fax

From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf Of Chris Thompson
Sent: Thursday, January 14, 2010 6:55 AM
To: vantage@yahoogroups .com
Subject: Re: [Vantage] Server out of memory when print previewing custom crystal reports?

We did have this issue. When we switched from V8 to E9. Reports created for V8, when ran, got this error in E9. The .rpt files were around 5MB due to images. I reduced the image sizes and they worked.

It did rear its ugly head a few weeks back but the user logged out and back in and it started working.

Thinking back I think someone said there was a parameter in Progress which can be altered to a higer figure, but ours was already set on the recommended figure.

____________ _________ _________ __
From: IT Support <itsupport@cubicdesi gns.com <mailto:itsupport% 40cubicdesigns. com> >
To: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
Sent: Fri, 20 November, 2009 22:07:37
Subject: RE: [Vantage] Server out of memory when print previewing custom crystal reports?

Charlie,

We are not...

We have a RAID 1 & 10 volumes in the server, with plenty of free space.

We also have 16GB of memory, with an average of 8GB free.

I am wondering if it's a Progress virtual memory issue????

Ron Flynn

From: vantage@yahoogroups .com [mailto:vantage@ yahoogroups .com] On Behalf
Of Charlie Wilson
Sent: Friday, November 20, 2009 3:42 PM
To: vantage@yahoogroups .com
Subject: RE: [Vantage] Server out of memory when print previewing custom
crystal reports?

I think I have gotten this when I have used an array and the array ran
out
of room. By chance are you using an array?

~Charlie

_____

From: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
[mailto:vantage@ yahoogroups .com <mailto:vantage% 40yahoogroups. com> ] On
Behalf Of
IT Support
Sent: Friday, November 20, 2009 4:31 PM
To: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
Subject: [Vantage] Server out of memory when print previewing custom
crystal
reports?

Has anyone experienced this?

If so, how do you handle it...

Thanks!

Ron Flynn

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
2
Any idea of that parameter?

We only experience this on a few workstations, (these are AutoCAD systems with at least 3GB of memory)

Also we only get errors in the workstation event log, not on the app server.



Thanks!



Ron Flynn



Cubic Designs, Inc.

CUSTOM MEZZANINE SYSTEMS

www.cubicdesigns.com

262.789.1966

262.789.1970 fax







From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Chris Thompson
Sent: Thursday, January 14, 2010 6:55 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Server out of memory when print previewing custom crystal reports?





We did have this issue. When we switched from V8 to E9. Reports created for V8, when ran, got this error in E9. The .rpt files were around 5MB due to images. I reduced the image sizes and they worked.

It did rear its ugly head a few weeks back but the user logged out and back in and it started working.

Thinking back I think someone said there was a parameter in Progress which can be altered to a higer figure, but ours was already set on the recommended figure.

________________________________
From: IT Support <itsupport@... <mailto:itsupport%40cubicdesigns.com> >
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Sent: Fri, 20 November, 2009 22:07:37
Subject: RE: [Vantage] Server out of memory when print previewing custom crystal reports?


Charlie,

We are not...

We have a RAID 1 & 10 volumes in the server, with plenty of free space.

We also have 16GB of memory, with an average of 8GB free.

I am wondering if it's a Progress virtual memory issue????

Ron Flynn

From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf
Of Charlie Wilson
Sent: Friday, November 20, 2009 3:42 PM
To: vantage@yahoogroups .com
Subject: RE: [Vantage] Server out of memory when print previewing custom
crystal reports?

I think I have gotten this when I have used an array and the array ran
out
of room. By chance are you using an array?

~Charlie

_____

From: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
[mailto:vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com> ] On
Behalf Of
IT Support
Sent: Friday, November 20, 2009 4:31 PM
To: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
Subject: [Vantage] Server out of memory when print previewing custom
crystal
reports?

Has anyone experienced this?

If so, how do you handle it...

Thanks!

Ron Flynn

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
3
How big is the .rpt file that you are trying to print?


Â



________________________________
From: IT Support <itsupport@...>
To: vantage@yahoogroups.com
Sent: Thu, 14 January, 2010 14:58:19
Subject: FW: [Vantage] Server out of memory when print previewing custom crystal reports?

Â
Any idea of that parameter?

We only experience this on a few workstations, (these are AutoCAD systems with at least 3GB of memory)

Also we only get errors in the workstation event log, not on the app server.



Thanks!



Ron Flynn



Cubic Designs, Inc.

CUSTOM MEZZANINE SYSTEMS

www.cubicdesigns. com

262.789.1966

262.789.1970 fax







From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf Of Chris Thompson
Sent: Thursday, January 14, 2010 6:55 AM
To: vantage@yahoogroups .com
Subject: Re: [Vantage] Server out of memory when print previewing custom crystal reports?





We did have this issue. When we switched from V8 to E9. Reports created for V8, when ran, got this error in E9. The .rpt files were around 5MB due to images. I reduced the image sizes and they worked.

It did rear its ugly head a few weeks back but the user logged out and back in and it started working.

Thinking back I think someone said there was a parameter in Progress which can be altered to a higer figure, but ours was already set on the recommended figure.

____________ _________ _________ __
From: IT Support <itsupport@cubicdesi gns.com <mailto:itsupport% 40cubicdesigns. com> >
To: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
Sent: Fri, 20 November, 2009 22:07:37
Subject: RE: [Vantage] Server out of memory when print previewing custom crystal reports?


Charlie,

We are not...

We have a RAID 1 & 10 volumes in the server, with plenty of free space.

We also have 16GB of memory, with an average of 8GB free.

I am wondering if it's a Progress virtual memory issue????

Ron Flynn

From: vantage@yahoogroups .com [mailto:vantage@ yahoogroups .com] On Behalf
Of Charlie Wilson
Sent: Friday, November 20, 2009 3:42 PM
To: vantage@yahoogroups .com
Subject: RE: [Vantage] Server out of memory when print previewing custom
crystal reports?

I think I have gotten this when I have used an array and the array ran
out
of room. By chance are you using an array?

~Charlie

_____

From: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
[mailto:vantage@ yahoogroups .com <mailto:vantage% 40yahoogroups. com> ] On
Behalf Of
IT Support
Sent: Friday, November 20, 2009 4:31 PM
To: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
Subject: [Vantage] Server out of memory when print previewing custom
crystal
reports?

Has anyone experienced this?

If so, how do you handle it...

Thanks!

Ron Flynn

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]