Vantage not starting

--- In vantage@y..., Steven Beals <sbeals@b...> wrote:
> anyone ever seen this happen. Users in Vantage are having no
problems
> at all, however if I or anyone else tries to get into vantage
nothing
> happens. If I click on my vantage icon, and I ctrl/alt/del only
vantage
> is loading, no progress, if I cancel that to let vantage to
continue to
> load, still nothing happens and if I cad again, vantage is gone.
Any
> ideas. BTW, we're running v5.0 and this is the first I've seen this
in
> the month we've been running.
>
> Thanks
>
> Steven Beals
> IT Manager
> Beaver Brook Circuits, Inc.
anyone ever seen this happen. Users in Vantage are having no problems
at all, however if I or anyone else tries to get into vantage nothing
happens. If I click on my vantage icon, and I ctrl/alt/del only vantage
is loading, no progress, if I cancel that to let vantage to continue to
load, still nothing happens and if I cad again, vantage is gone. Any
ideas. BTW, we're running v5.0 and this is the first I've seen this in
the month we've been running.

Thanks

Steven Beals
IT Manager
Beaver Brook Circuits, Inc.
Steven,

I am working on Vantage 4.0
Is this on certain workstation's? I had the same problem that I posted yesterday. I had one workstation which was working fine then all of sudden Vantage stopped itself and closed.

What I found to be the problem, is that I had a time syncing program running on this machine, the time sync was not running/configured properly, so the time was not updating. Once I fixed that I was able to run Vantage again. I am not sure why it would
not run but that did fix my problem.

I also had this happen to me before (same machine) I had to uninstall and reinstall Progress Client. We thought it was an isolated problem, so we did not dig to much until it happened again.

I'm not sure if this helps but...

Thanks,
Dina

P.S. Also another use e-mailed recommended I clean up the vntgwork folder.


Steven Beals wrote:

> anyone ever seen this happen. Users in Vantage are having no problems
> at all, however if I or anyone else tries to get into vantage nothing
> happens. If I click on my vantage icon, and I ctrl/alt/del only vantage
> is loading, no progress, if I cancel that to let vantage to continue to
> load, still nothing happens and if I cad again, vantage is gone. Any
> ideas. BTW, we're running v5.0 and this is the first I've seen this in
> the month we've been running.
>
> Thanks
>
> Steven Beals
> IT Manager
> Beaver Brook Circuits, Inc.
>
>
> To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please go to: http://groups.yahoo.com/group/vantage/files/. Note: You must have already linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Steven:

I'm still on 4.0, but had a similar thing happen when I installed a Winnt
workstation and accidentally defaulted to the incorrect directory. As long
as people stayed logged on to Vantage they were fine, but when they got out
and attempted to go back in, poof!! Vantage was gone. You have to uninstall
and reinstall the workstation, and in my case, I had 4 others I had to do as
well. Live and learn...I just hope I don't forget all this stuff!

So my question is - have you just recently installed a new workstation?

Lydia

-----Original Message-----
From: Steven Beals [mailto:sbeals@...]
Sent: Wednesday, March 21, 2001 8:58 AM
To: Vantage Egroup (E-mail)
Subject: [Vantage] Vantage not starting

anyone ever seen this happen. Users in Vantage are having no problems
at all, however if I or anyone else tries to get into vantage nothing
happens. If I click on my vantage icon, and I ctrl/alt/del only vantage
is loading, no progress, if I cancel that to let vantage to continue to
load, still nothing happens and if I cad again, vantage is gone. Any
ideas. BTW, we're running v5.0 and this is the first I've seen this in
the month we've been running.

Thanks

Steven Beals
IT Manager
Beaver Brook Circuits, Inc.



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Thanks Dina, I uninstalled the progress client, then reinstalled and
that seems to have cleared up the problem.



-----Original Message-----
From: Dina Hieber [mailto:dhieber@...]
Sent: Wednesday, March 21, 2001 2:37 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Vantage not starting


Steven,

I am working on Vantage 4.0
Is this on certain workstation's? I had the same problem that I posted
yesterday. I had one workstation which was working fine then all of
sudden Vantage stopped itself and closed.

What I found to be the problem, is that I had a time syncing program
running on this machine, the time sync was not running/configured
properly, so the time was not updating. Once I fixed that I was able to
run Vantage again. I am not sure why it would
not run but that did fix my problem.

I also had this happen to me before (same machine) I had to uninstall
and reinstall Progress Client. We thought it was an isolated problem,
so we did not dig to much until it happened again.

I'm not sure if this helps but...

Thanks,
Dina

P.S. Also another use e-mailed recommended I clean up the vntgwork
folder.


Steven Beals wrote:

> anyone ever seen this happen. Users in Vantage are having no problems
> at all, however if I or anyone else tries to get into vantage nothing
> happens. If I click on my vantage icon, and I ctrl/alt/del only
vantage
> is loading, no progress, if I cancel that to let vantage to continue
to
> load, still nothing happens and if I cad again, vantage is gone. Any
> ideas. BTW, we're running v5.0 and this is the first I've seen this in
> the month we've been running.
>
> Thanks
>
> Steven Beals
> IT Manager
> Beaver Brook Circuits, Inc.
>
>
> To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have
already linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have
already linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/