Volo viewer - autocad

system · February 20, 2002, 1:00pm

Why worry about AutoCAD, use PDF's, it so much easier to user than Volo...
Furthermore, all document types can be accessed when convert to PDF,
regardless of the application which originated the document...

We have been using electronic job packets now for 6-9months and it keeps
getting better and better. : )

Enjoy

Rick Joslin
V-S Industries

-----Original Message-----
From: Todd Anderson [mailto:tanderson@...]
Sent: Tuesday, February 19, 2002 8:18 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage]VOLO VIEWER - AUTOCAD

John,

We just went through the exact same issue and were unable to resolve the
issue. I believe there is a upgrade/pro version of VoloView that gives you
this option but you have to pay for that version. Funny how that works.

Taking the same drawing and printing it using AutoView with the "Default"
pen settings the prints came out perfectly. And no, AutoView is not free.

There is no such thing as a free lunch ?

Todd Anderson

-----Original Message-----
From: John Walter [mailto:john.w@...]
Sent: Monday, February 18, 2002 4:24 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage]VOLO VIEWER - AUTOCAD

I have been observing the group since August and found it to be a valuable
resource. We commence implementation of Vantage 5.1 in March.

I downloaded VOLO VIEWER after reading the thread last week. We want to
access drawings over our VPN and print them locally. I'm fine with accessing
the drawings however I cannot find a way to set the print quality locally.
It appears that you need a plotter otherwise you get default pen weights
which are too light to read. Any ideas?

Regards,

John Walter
Systems Administrator
Hufcor Pty Ltd

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=218512.1856015.3360178.1269402/D=egroupweb/S=17050071
83:HM/A=928901/R=0/*http://ad.doubleclick.net/clk;3788034;6800959;v%3fhttp:/
/www.verisign.com/cgi-bin/go.cgi?a=b228473240057000>

<http://us.adserver.yahoo.com/l?M=218512.1856015.3360178.1269402/D=egroupmai
l/S=1705007183:HM/A=928901/rand=387719471>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · February 14, 2002, 10:53am

Is anybody using Volo Viewer (free) to link AutoCad documents in Vantage
rather than Autoview ($$$)?

If so, could you tell me how you set this up? I know you have to go to
System Management > Configuration Maintenance > Document Association. Here
Select Edit and Add. However, what information needs to be typed in here
for: Extension, Description, View Command and Print Command?

Thanks in advance,

Fausto

[Non-text portions of this message have been removed]

system · February 14, 2002, 10:56am

I'd be interested in hearing about this, too. Anybody doing it?

Gary Polvinale
Denton ATD

-----Original Message-----
From: Fausto Filippi [mailto:ffilippi@...]
Sent: Thursday, February 14, 2002 10:55 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] VOLO VIEWER - AUTOCAD

Is anybody using Volo Viewer (free) to link AutoCad documents in Vantage
rather than Autoview ($$$)?

If so, could you tell me how you set this up? I know you have to go to
System Management > Configuration Maintenance > Document Association. Here
Select Edit and Add. However, what information needs to be typed in here
for: Extension, Description, View Command and Print Command?

Thanks in advance,

Fausto

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · February 14, 2002, 2:24pm

We are using Volo View with the Vantage Document Manager. With Document
Association contained under the System Manager we have associated the dwg
extension with the view command of "voloview.exe &1".

-----Original Message-----
From: Gary Polvinale [mailto:garyp@...]
Sent: Thursday, February 14, 2002 10:56 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] VOLO VIEWER - AUTOCAD

I'd be interested in hearing about this, too. Anybody doing it?

Gary Polvinale
Denton ATD

-----Original Message-----
From: Fausto Filippi [mailto:ffilippi@...]
Sent: Thursday, February 14, 2002 10:55 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] VOLO VIEWER - AUTOCAD

Is anybody using Volo Viewer (free) to link AutoCad documents in Vantage
rather than Autoview ($$$)?

If so, could you tell me how you set this up? I know you have to go to
System Management > Configuration Maintenance > Document Association. Here
Select Edit and Add. However, what information needs to be typed in here
for: Extension, Description, View Command and Print Command?

Thanks in advance,

Fausto

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · February 14, 2002, 2:29pm

Sorry Paul,

Inside Document Association Maintenance from the File Menu I choose Edit >
Add.

I am presented with fields which need to be populated. What has to be
entered here? What does your setup have for these fields?

Extension:
Description:
View Command:
Print Command:

Thanks,

Fausto

-----Original Message-----
From: Paul Labuda [mailto:plabuda@...]
Sent: Thursday, February 14, 2002 2:27 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] VOLO VIEWER - AUTOCAD

We are using Volo View with the Vantage Document Manager. With Document
Association contained under the System Manager we have associated the dwg
extension with the view command of "voloview.exe &1".

-----Original Message-----
From: Gary Polvinale [mailto:garyp@...]
Sent: Thursday, February 14, 2002 10:56 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] VOLO VIEWER - AUTOCAD

I'd be interested in hearing about this, too. Anybody doing it?

Gary Polvinale
Denton ATD

-----Original Message-----
From: Fausto Filippi [mailto:ffilippi@...]
Sent: Thursday, February 14, 2002 10:55 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] VOLO VIEWER - AUTOCAD

Is anybody using Volo Viewer (free) to link AutoCad documents in Vantage
rather than Autoview ($$$)?

If so, could you tell me how you set this up? I know you have to go to
System Management > Configuration Maintenance > Document Association. Here
Select Edit and Add. However, what information needs to be typed in here
for: Extension, Description, View Command and Print Command?

Thanks in advance,

Fausto

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · February 14, 2002, 2:49pm

I am presented with fields which need to be populated. What has to be
entered here? What does your setup have for these fields?

Extension: dwg
Description: Drawing Files
View Command: voloview.exe &1
Print Command:

system · February 14, 2002, 3:00pm

Fausto,
Do you have a link to download the VOLO viewer?

Troy Funte
Liberty Electronics

----- Original Message -----
From: "Paul Labuda" <plabuda@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, February 14, 2002 2:50 PM
Subject: RE: [Vantage] VOLO VIEWER - AUTOCAD

>
>
>
> I am presented with fields which need to be populated. What has to be
> entered here? What does your setup have for these fields?
>
> Extension: dwg
> Description: Drawing Files
> View Command: voloview.exe &1
> Print Command:
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

system · February 14, 2002, 3:34pm

Excellent.

Works like a charm. Thanks.

Fausto

-----Original Message-----
From: Paul Labuda [mailto:plabuda@...]
Sent: Thursday, February 14, 2002 2:51 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] VOLO VIEWER - AUTOCAD

I am presented with fields which need to be populated. What has to be
entered here? What does your setup have for these fields?

Extension: dwg
Description: Drawing Files
View Command: voloview.exe &1
Print Command:

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · February 14, 2002, 3:37pm

Troy,

It is too large otherwise I would just send it to you. Click on this link,
fill in your information and download. Let me know if this works for you.

Fausto

http://usa.autodesk.com/adsk/index/0,,837403-123112,00.html

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, February 14, 2002 3:00 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] VOLO VIEWER - AUTOCAD

Fausto,
Do you have a link to download the VOLO viewer?

Troy Funte
Liberty Electronics

----- Original Message -----
From: "Paul Labuda" <plabuda@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, February 14, 2002 2:50 PM
Subject: RE: [Vantage] VOLO VIEWER - AUTOCAD

>
>
>
> I am presented with fields which need to be populated. What has to be
> entered here? What does your setup have for these fields?
>
> Extension: dwg
> Description: Drawing Files
> View Command: voloview.exe &1
> Print Command:
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · February 14, 2002, 3:45pm

Thanks. I'm chugging away at 28.8 as we speak. Only 1 hr. 46 minutes left.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Fausto Filippi
To: 'vantage@yahoogroups.com'
Sent: Thursday, February 14, 2002 3:38 PM
Subject: RE: [Vantage] VOLO VIEWER - AUTOCAD

Troy,

It is too large otherwise I would just send it to you. Click on this link,
fill in your information and download. Let me know if this works for you.

Fausto

http://usa.autodesk.com/adsk/index/0,,837403-123112,00.html

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Thursday, February 14, 2002 3:00 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] VOLO VIEWER - AUTOCAD

Fausto,
Do you have a link to download the VOLO viewer?

Troy Funte
Liberty Electronics

----- Original Message -----
From: "Paul Labuda" <plabuda@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, February 14, 2002 2:50 PM
Subject: RE: [Vantage] VOLO VIEWER - AUTOCAD

>
>
>
> I am presented with fields which need to be populated. What has to be
> entered here? What does your setup have for these fields?
>
> Extension: dwg
> Description: Drawing Files
> View Command: voloview.exe &1
> Print Command:
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Yahoo! Groups Sponsor
ADVERTISEMENT

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

system · February 15, 2002, 7:30am

Paula,

I have been trying to get this to work for months!

I've loaded your view command but it still won't work - any ideas - is it a
mapping issue on the various servers and drives?

Best Regards,

Paul Whittle
Quality Assurance Manager
Jiskoot Autocontrol Ltd.
Tunbridge Wells, Kent TN1 2DJ, UK
Tel +44 (0)1892 518000
Fax +44 (0)1892 518100
www.jiskoot.com
Date: Thu, 14 Feb 2002 14:26:36 -0500
From: "Paul Labuda" <plabuda@...>
Subject: RE: VOLO VIEWER - AUTOCAD

We are using Volo View with the Vantage Document Manager. With Document
Association contained under the System Manager we have associated the dwg
extension with the view command of "voloview.exe &1".

###########################################
This message has been scanned by F-Secure Anti-Virus for Internet Mail.
For more information, connect to http://www.F-Secure.com/

system · February 15, 2002, 8:54am

A few things.

Each person trying to view the document must have Volo Viewer Installed.
Second, the file must reside on a network share accessible to whoever needs
to view it.
Third -- This is only my personal experience. Keep the path to the file
short i.e. S:\drawing\test.dwg. I tried it with a long path and it gave me
an error.
Fourth -- Remember for the View Command it must be -- voloview.exe &1 --
There is no space between the ampersand and the One.

Give it another try and let us know.

Fausto

-----Original Message-----
From: Paul Whittle [mailto:pwhittle@...]
Sent: Friday, February 15, 2002 7:33 AM
To: Vantage
Subject: [Vantage] RE: VOLO VIEWER - AUTOCAD

Paula,

I have been trying to get this to work for months!

I've loaded your view command but it still won't work - any ideas - is it a
mapping issue on the various servers and drives?

Best Regards,

Paul Whittle
Quality Assurance Manager
Jiskoot Autocontrol Ltd.
Tunbridge Wells, Kent TN1 2DJ, UK
Tel +44 (0)1892 518000
Fax +44 (0)1892 518100
www.jiskoot.com
Date: Thu, 14 Feb 2002 14:26:36 -0500
From: "Paul Labuda" <plabuda@...>
Subject: RE: VOLO VIEWER - AUTOCAD

We are using Volo View with the Vantage Document Manager. With Document
Association contained under the System Manager we have associated the dwg
extension with the view command of "voloview.exe &1".

###########################################
This message has been scanned by F-Secure Anti-Virus for Internet Mail.
For more information, connect to http://www.F-Secure.com/

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · February 15, 2002, 8:58am

No spaces in the drawing path.

Patrick

-----Original Message-----
From: Fausto Filippi [mailto:ffilippi@...]
Sent: Friday, February 15, 2002 7:56 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

A few things.

Each person trying to view the document must have Volo Viewer Installed.
Second, the file must reside on a network share accessible to whoever needs
to view it.
Third -- This is only my personal experience. Keep the path to the file
short i.e. S:\drawing\test.dwg. I tried it with a long path and it gave me
an error.
Fourth -- Remember for the View Command it must be -- voloview.exe &1 --
There is no space between the ampersand and the One.

Give it another try and let us know.

Fausto

-----Original Message-----
From: Paul Whittle [mailto:pwhittle@...]
Sent: Friday, February 15, 2002 7:33 AM
To: Vantage
Subject: [Vantage] RE: VOLO VIEWER - AUTOCAD

Paula,

I have been trying to get this to work for months!

I've loaded your view command but it still won't work - any ideas - is it a
mapping issue on the various servers and drives?

Best Regards,

Paul Whittle
Quality Assurance Manager
Jiskoot Autocontrol Ltd.
Tunbridge Wells, Kent TN1 2DJ, UK
Tel +44 (0)1892 518000
Fax +44 (0)1892 518100
www.jiskoot.com
Date: Thu, 14 Feb 2002 14:26:36 -0500
From: "Paul Labuda" <plabuda@...>
Subject: RE: VOLO VIEWER - AUTOCAD

We are using Volo View with the Vantage Document Manager. With Document
Association contained under the System Manager we have associated the dwg
extension with the view command of "voloview.exe &1".

###########################################
This message has been scanned by F-Secure Anti-Virus for Internet Mail.
For more information, connect to http://www.F-Secure.com/

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · February 15, 2002, 9:03am

Patrick,
That's what I found as well. If your path is e:\documents and settings\files\test.dwg
then it won't work. Putting the path as e:\epic50\documnts\test.dwg
worked fine.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Winter, Patrick
To: 'vantage@yahoogroups.com'
Sent: Friday, February 15, 2002 8:58 AM
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

No spaces in the drawing path.

Patrick

-----Original Message-----
From: Fausto Filippi [mailto:ffilippi@...]
Sent: Friday, February 15, 2002 7:56 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

A few things.

Each person trying to view the document must have Volo Viewer Installed.
Second, the file must reside on a network share accessible to whoever needs
to view it.
Third -- This is only my personal experience. Keep the path to the file
short i.e. S:\drawing\test.dwg. I tried it with a long path and it gave me
an error.
Fourth -- Remember for the View Command it must be -- voloview.exe &1 --
There is no space between the ampersand and the One.

Give it another try and let us know.

Fausto

-----Original Message-----
From: Paul Whittle [mailto:pwhittle@...]
Sent: Friday, February 15, 2002 7:33 AM
To: Vantage
Subject: [Vantage] RE: VOLO VIEWER - AUTOCAD

Paula,

I have been trying to get this to work for months!

I've loaded your view command but it still won't work - any ideas - is it a
mapping issue on the various servers and drives?

Best Regards,

Paul Whittle
Quality Assurance Manager
Jiskoot Autocontrol Ltd.
Tunbridge Wells, Kent TN1 2DJ, UK
Tel +44 (0)1892 518000
Fax +44 (0)1892 518100
www.jiskoot.com
Date: Thu, 14 Feb 2002 14:26:36 -0500
From: "Paul Labuda" <plabuda@...>
Subject: RE: VOLO VIEWER - AUTOCAD

We are using Volo View with the Vantage Document Manager. With Document
Association contained under the System Manager we have associated the dwg
extension with the view command of "voloview.exe &1".

###########################################
This message has been scanned by F-Secure Anti-Virus for Internet Mail.
For more information, connect to http://www.F-Secure.com/

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Yahoo! Groups Sponsor
ADVERTISEMENT

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

system · February 15, 2002, 9:34am

e:\documents and settings\files\test.dwg ---------- Nope
e:\"documents and settings"\files\test.dwg -------- Should work ...

If directory or sub-directory name is over 8 characters or includes spaces -
enclose it in quotes

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Friday, February 15, 2002 8:04 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] RE: VOLO VIEWER - AUTOCAD

Patrick,
That's what I found as well. If your path is e:\documents and
settings\files\test.dwg
then it won't work. Putting the path as e:\epic50\documnts\test.dwg
worked fine.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Winter, Patrick
To: 'vantage@yahoogroups.com'
Sent: Friday, February 15, 2002 8:58 AM
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

No spaces in the drawing path.

Patrick

-----Original Message-----
From: Fausto Filippi [mailto:ffilippi@...]
Sent: Friday, February 15, 2002 7:56 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

A few things.

Each person trying to view the document must have Volo Viewer Installed.
Second, the file must reside on a network share accessible to whoever
needs
to view it.
Third -- This is only my personal experience. Keep the path to the file
short i.e. S:\drawing\test.dwg. I tried it with a long path and it gave me
an error.
Fourth -- Remember for the View Command it must be -- voloview.exe &1 --
There is no space between the ampersand and the One.

Give it another try and let us know.

Fausto

-----Original Message-----
From: Paul Whittle [mailto:pwhittle@...]
Sent: Friday, February 15, 2002 7:33 AM
To: Vantage
Subject: [Vantage] RE: VOLO VIEWER - AUTOCAD

Paula,

I have been trying to get this to work for months!

I've loaded your view command but it still won't work - any ideas - is it
a
mapping issue on the various servers and drives?

Best Regards,

Paul Whittle
Quality Assurance Manager
Jiskoot Autocontrol Ltd.
Tunbridge Wells, Kent TN1 2DJ, UK
Tel +44 (0)1892 518000
Fax +44 (0)1892 518100
www.jiskoot.com
Date: Thu, 14 Feb 2002 14:26:36 -0500
From: "Paul Labuda" <plabuda@...>
Subject: RE: VOLO VIEWER - AUTOCAD

We are using Volo View with the Vantage Document Manager. With Document
Association contained under the System Manager we have associated the dwg
extension with the view command of "voloview.exe &1".

###########################################
This message has been scanned by F-Secure Anti-Virus for Internet Mail.
For more information, connect to http://www.F-Secure.com/
<http://www.F-Secure.com/>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>

Yahoo! Groups Sponsor
ADVERTISEMENT

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]

system · February 15, 2002, 10:41am

Todd,
That way doesn't work either. The error message says,

Failed to open E:\"Documents

Here's what I found DOES work.

If your file is in the path: e:\documents and settings\files\test.dwg
Enter this instead: e:\docume~1\files\test.dwg

On a long filename, chop off the folder at the sixth character and add "~1".
If there is another folder with the same 6 characters, use "~2", etc.
That is the DOS way of specifying long filenames.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Todd Anderson
To: 'vantage@yahoogroups.com'
Sent: Friday, February 15, 2002 9:26 AM
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

e:\documents and settings\files\test.dwg ---------- Nope
e:\"documents and settings"\files\test.dwg -------- Should work ...

If directory or sub-directory name is over 8 characters or includes spaces -
enclose it in quotes

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Friday, February 15, 2002 8:04 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] RE: VOLO VIEWER - AUTOCAD

Patrick,
That's what I found as well. If your path is e:\documents and
settings\files\test.dwg
then it won't work. Putting the path as e:\epic50\documnts\test.dwg
worked fine.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Winter, Patrick
To: 'vantage@yahoogroups.com'
Sent: Friday, February 15, 2002 8:58 AM
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

No spaces in the drawing path.

Patrick

-----Original Message-----
From: Fausto Filippi [mailto:ffilippi@...]
Sent: Friday, February 15, 2002 7:56 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

A few things.

Each person trying to view the document must have Volo Viewer Installed.
Second, the file must reside on a network share accessible to whoever
needs
to view it.
Third -- This is only my personal experience. Keep the path to the file
short i.e. S:\drawing\test.dwg. I tried it with a long path and it gave me
an error.
Fourth -- Remember for the View Command it must be -- voloview.exe &1 --
There is no space between the ampersand and the One.

Give it another try and let us know.

Fausto

-----Original Message-----
From: Paul Whittle [mailto:pwhittle@...]
Sent: Friday, February 15, 2002 7:33 AM
To: Vantage
Subject: [Vantage] RE: VOLO VIEWER - AUTOCAD

Paula,

I have been trying to get this to work for months!

I've loaded your view command but it still won't work - any ideas - is it
a
mapping issue on the various servers and drives?

Best Regards,

Paul Whittle
Quality Assurance Manager
Jiskoot Autocontrol Ltd.
Tunbridge Wells, Kent TN1 2DJ, UK
Tel +44 (0)1892 518000
Fax +44 (0)1892 518100
www.jiskoot.com
Date: Thu, 14 Feb 2002 14:26:36 -0500
From: "Paul Labuda" <plabuda@...>
Subject: RE: VOLO VIEWER - AUTOCAD

We are using Volo View with the Vantage Document Manager. With Document
Association contained under the System Manager we have associated the dwg
extension with the view command of "voloview.exe &1".

###########################################
This message has been scanned by F-Secure Anti-Virus for Internet Mail.
For more information, connect to http://www.F-Secure.com/
<http://www.F-Secure.com/>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>

Yahoo! Groups Sponsor
ADVERTISEMENT

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

system · February 15, 2002, 1:07pm

SOLUTION: To be be able to use long filenames in Document Association, you need to embed the parameter (&1) in quotes as in:

So the view command in Document associations should be:

voloview.exe "&1" or you could use
winword.exe "&1"

Then, in your actual path name where you are associating the document, you can use the full path, including any spaces, without needing quotes or DOS Short names. As in:

e:\documents and settings\files\test.dwg

Thanks to Doug Williams at Epicor for the help.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Troy Funte
To: vantage@yahoogroups.com
Sent: Friday, February 15, 2002 10:41 AM
Subject: Re: [Vantage] RE: VOLO VIEWER - AUTOCAD

Todd,
That way doesn't work either. The error message says,

Failed to open E:\"Documents

Here's what I found DOES work.

If your file is in the path: e:\documents and settings\files\test.dwg
Enter this instead: e:\docume~1\files\test.dwg

On a long filename, chop off the folder at the sixth character and add "~1".
If there is another folder with the same 6 characters, use "~2", etc.
That is the DOS way of specifying long filenames.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Todd Anderson
To: 'vantage@yahoogroups.com'
Sent: Friday, February 15, 2002 9:26 AM
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

e:\documents and settings\files\test.dwg ---------- Nope
e:\"documents and settings"\files\test.dwg -------- Should work ...

If directory or sub-directory name is over 8 characters or includes spaces -
enclose it in quotes

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Friday, February 15, 2002 8:04 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] RE: VOLO VIEWER - AUTOCAD

Patrick,
That's what I found as well. If your path is e:\documents and
settings\files\test.dwg
then it won't work. Putting the path as e:\epic50\documnts\test.dwg
worked fine.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Winter, Patrick
To: 'vantage@yahoogroups.com'
Sent: Friday, February 15, 2002 8:58 AM
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

No spaces in the drawing path.

Patrick

-----Original Message-----
From: Fausto Filippi [mailto:ffilippi@...]
Sent: Friday, February 15, 2002 7:56 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] RE: VOLO VIEWER - AUTOCAD

A few things.

Each person trying to view the document must have Volo Viewer Installed.
Second, the file must reside on a network share accessible to whoever
needs
to view it.
Third -- This is only my personal experience. Keep the path to the file
short i.e. S:\drawing\test.dwg. I tried it with a long path and it gave me
an error.
Fourth -- Remember for the View Command it must be -- voloview.exe &1 --
There is no space between the ampersand and the One.

Give it another try and let us know.

Fausto

-----Original Message-----
From: Paul Whittle [mailto:pwhittle@...]
Sent: Friday, February 15, 2002 7:33 AM
To: Vantage
Subject: [Vantage] RE: VOLO VIEWER - AUTOCAD

Paula,

I have been trying to get this to work for months!

I've loaded your view command but it still won't work - any ideas - is it
a
mapping issue on the various servers and drives?

Best Regards,

Paul Whittle
Quality Assurance Manager
Jiskoot Autocontrol Ltd.
Tunbridge Wells, Kent TN1 2DJ, UK
Tel +44 (0)1892 518000
Fax +44 (0)1892 518100
www.jiskoot.com
Date: Thu, 14 Feb 2002 14:26:36 -0500
From: "Paul Labuda" <plabuda@...>
Subject: RE: VOLO VIEWER - AUTOCAD

We are using Volo View with the Vantage Document Manager. With Document
Association contained under the System Manager we have associated the dwg
extension with the view command of "voloview.exe &1".

###########################################
This message has been scanned by F-Secure Anti-Virus for Internet Mail.
For more information, connect to http://www.F-Secure.com/
<http://www.F-Secure.com/>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>

Yahoo! Groups Sponsor
ADVERTISEMENT

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor
ADVERTISEMENT

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

system · February 18, 2002, 5:20pm

I have been observing the group since August and found it to be a valuable
resource. We commence implementation of Vantage 5.1 in March.

I downloaded VOLO VIEWER after reading the thread last week. We want to
access drawings over our VPN and print them locally. I'm fine with accessing
the drawings however I cannot find a way to set the print quality locally.
It appears that you need a plotter otherwise you get default pen weights
which are too light to read. Any ideas?

Regards,

John Walter
Systems Administrator
Hufcor Pty Ltd

[Non-text portions of this message have been removed]

system · February 18, 2002, 5:26pm

I'm not sure about Volo Viewer but in in AutoVue you can over ride the pen
widths with minimums. We use .01, I have not found such a setting on the
screens for Volo Viewer.

Patrick

-----Original Message-----
From: John Walter [mailto:john.w@...]
Sent: Monday, February 18, 2002 4:24 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage]VOLO VIEWER - AUTOCAD

I have been observing the group since August and found it to be a valuable
resource. We commence implementation of Vantage 5.1 in March.

I downloaded VOLO VIEWER after reading the thread last week. We want to
access drawings over our VPN and print them locally. I'm fine with accessing
the drawings however I cannot find a way to set the print quality locally.
It appears that you need a plotter otherwise you get default pen weights
which are too light to read. Any ideas?

Regards,

John Walter
Systems Administrator
Hufcor Pty Ltd

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · February 18, 2002, 11:56pm

John,

VoloView Express doesn't give the same control over printing compared to
VoloView 2. We found it necessary to upgrade to the full version of
VoloView (currently ver.2) to acheive the control pver our print quality.
We have a wide variety of drawing sizes which were formatted to a variety of
output devices. Voloview 2 supports system printers, fitting to a page and
setting the drawing to monochrome. It is kind of a (AutoCad LT)-LT.
Express is really only effective as a viewer and not as a bridge to your
printer.

David Gartner
EPG Companies Inc.
19900 County Rd 81 763-424-2613 (v)
Maple Grove MN 55311 763-493-4812 (f)
dgartner@... www.epgco.com

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Monday, February 18, 2002 4:26 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage]VOLO VIEWER - AUTOCAD

I'm not sure about Volo Viewer but in in AutoVue you can over ride the pen
widths with minimums. We use .01, I have not found such a setting on the
screens for Volo Viewer.

Patrick

-----Original Message-----
From: John Walter [mailto:john.w@...]
Sent: Monday, February 18, 2002 4:24 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage]VOLO VIEWER - AUTOCAD

I have been observing the group since August and found it to be a valuable
resource. We commence implementation of Vantage 5.1 in March.

I downloaded VOLO VIEWER after reading the thread last week. We want to
access drawings over our VPN and print them locally. I'm fine with accessing
the drawings however I cannot find a way to set the print quality locally.
It appears that you need a plotter otherwise you get default pen weights
which are too light to read. Any ideas?

Regards,

John Walter
Systems Administrator
Hufcor Pty Ltd

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/